AR-280 (serv.man12). AR280 285 335 Service Manual-Simulation Codes - Sharp Copying Equipment Service Manual (repair manual)

ar-280 (serv.man12) service manual
Model
AR-280 (serv.man12)
Pages
118
Size
877.93 KB
Type
PDF
Document
Service Manual
Brand
Device
Copying Equipment / AR280 285 335 Service Manual-Simulation Codes
File
ar-280-sm12.pdf
Date

Read Sharp AR-280 (serv.man12) Service Manual online

SERVICE MANUAL
Digital Copier
MODEL
 AR-280/285/335
SHARP CORPORATION
Parts marked with "
" is important for maintaining the safety of the set. Be sure to replace these parts with specified
ones for maintaining the safety and performance of the set.
[ 1 ] GENERAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  1-1
[ 2 ] SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  2-1
[ 3 ] OPTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  3-1
[ 4 ] CONSUMABLE PARTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  4-1
[ 5 ] INSTALLATION AND SETUP . . . . . . . . . . . . . . . . . . . . . . . . . .  5-1
[ 6 ] EXTERNAL VIEW AND INTERNAL STRUCTURE . . . . . . . . . .  6-1
[ 7 ] SETTING AND ADJUSTMENTS . . . . . . . . . . . . . . . . . . . . . . . .  7-1
[ 8 ] SIMULATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  8-1
[ 9 ] MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  9-1
[10] DISASSEMBLY AND ASSEMBLY . . . . . . . . . . . . . . . . . . . . . .  10-1
[11] TROUBLE CODE LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  11-1
[12] OPERATIONAL DESCRIPTION . . . . . . . . . . . . . . . . . . . . . . .  12-1
CONTENTS
(Danish)
ADVARSEL !
Lithiumbatteri – Eksplosionsfare ved fejlagtig håndtering.
Udskiftning må kun ske med batteri
af samme fabrikat og type.
Levér det brugte batteri tilbage til leverandoren.
(English)
Caution !
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type
recommended by the manufacturer.
Dispose of used batteries according to manufacturer’s instructions.
(Finnish)
VAROITUS
Paristo voi räjähtää, jos se on virheellisesti asennettu.
Vaihda paristo ainoastaan laitevalmistajan suosittelemaan
tyyppiin. Hävitä käytetty paristo valmistajan ohjeiden
mukaisesti.
(French)
ATTENTION
Il y a danger d’explosion s’ il y a remplacement incorrect
de la batterie. Remplacer uniquement avec une batterie du
même type ou d’un type équivalent recommandé par 
le constructeur.
Mettre au rebut les batteries usagées conformément aux
instructions du fabricant.
(Swedish)
VARNING
Explosionsfara vid felaktigt batteribyte.
Använd samma batterityp eller en ekvivalent
typ som rekommenderas av apparattillverkaren.
Kassera använt batteri enligt fabrikantens
instruktion.
CAUTION FOR BATTERY REPLACEMENT
[8] SIMULATION
(Diagnostics, setting, adjustment value
input, data display)
1. Outline and purpose
There are following simulation functions to check the machine opera-
tions, troubleshoot, find causes, make various settings, improves ad-
justment work speeds and serviceability. 
1) Various adjustments
2) Specification and function setting
3) Trouble cancel
4) Operation check
5) Counters check, setting, clear
6) Machine operation conditions (operation history) data check, clear
7) Transmission of various data (adjustment, setting, operations,
counter, etc.)
The operating procedures and displays slightly differ from the form of
the machine operation panel.
The typical forms are as follows:
1) Code system: Values input and mode selection are made with the
10-key pad and various function keys. 
2) Switch system: Simulation mode selection is made by combina-
tion of switch setting. 
3) Values and mode selection is made with various function keys. As
a special one, a jumper wire is used to connect the check points
on the PWB to select the desired mode. 
2. Code system simulation 
A. Operating procedures and operations
Entering the simulation mode
1) Program (P) key 
 Interrupt key 
 Clear key 
 Interrupt key
(The machine enters the standby mode for the simulation main
code.)
2) Enter the main code with 10-key pad. 
 Press START key.
3) Enter the sub code of with 10-keypad. 
 Press START key.
4) Select the mode and the item with the 1-key pad and the function
key. 
5) The machine enters the selected mode.
To start the simulation, press the START key or the function key.
To cancel the current simulation mode and to change the main
code and the sub code, press the interrupt key. 
The simulation mode is canceled and the machine returns to the
normal operation mode. 
1) Press the all clear key. 
SIM 46-12, 13, 14, 15, 16, SIM66 and SIM68 are provided only for
Japan models (FAX mode/ASK/IrDA).
8 – 1
YES
NO
NO
YES
YES
YES
NO
NO
NO
YES
NO
YES
YES
NO
NO
YES
YES
NO
Standby for entry of SIM
sub code
Enter SIM sub code with
the 10-key.
Press the START button.
Press the START button.
The display is made according
to the selected mode and the item.
START (Normal mode)
Press the Program (P) key.
Press the interrupt key.
Press the clear key.
Press the interrupt key.
Standby for entry of
SIM code.
Enter the main code of
SIM with the 10-key.
The main code of SIM
is displayed.
Press the START button.
Is there a sub code ?
Select the mode and the
item with the 10-key and
the function key.
Operation check ?
Operating conditions
check ?
Data clear ?
Adjustments
or setting (counter data
change) ?
Do you
want to change the
content ?
Enter the new setting and
adjustment values.
Press the interrupt key.
Press the START button.
Operation is made according
to the selected mode and item.
Press the START button.
The display is made according to
the selected some and the item.
Press the START button.
Press the START button.
Is it the same
simulation ?
Press the interrupt key.
Do you want
to perform another
simulation ?
Do you
want to end the
simulation ?
The changed content
is stored.
The simulation mode
is canceled.
Press the clear all key.
Operation is made according
to the selected mode and the item.
(Other modes)
The selected mode and
the item are cleared.
8 – 2
Page of 118
Display

Download Sharp AR-280 (serv.man12) Service Manual (Repair Manual)

Here you can read online and download Sharp AR-280 (serv.man12) Service Manual in PDF. AR-280 (serv.man12) service manual will guide through the process and help you recover, restore, fix, disassemble and repair Sharp AR-280 (serv.man12) Copying Equipment. Information contained in service manuals typically includes schematics / circuit diagrams, wiring diagrams, block diagrams, printed wiring boards, exploded views, parts list, disassembly / assembly, pcb.