Read Sharp AR-280 (serv.man12) Service Manual online
53
53 - 1
Purpose
Adjustment
Function
(Purpose)
(Purpose)
Used to adjust the document stop position in each operation mode of ADF/RADF. (Target model:
AR-F230/S280/F280R/S330/280/285/335)
AR-F230/S280/F280R/S330/280/285/335)
Section
ADF/RADF/UDH/SPF
Item
Operation
Operation/
Procedure
Procedure
1. Select the adjustment mode with [
↑
], [
↓
] keys.
2. Enter the adjustment value with the 10-key.
3. Press the [OK] key.
The value entered in procedure 2 is set.
This is used to set the document transport belt stop timing.
This is used to set the document transport belt stop timing.
NORMAL(S)
Norma l paper front surface, stop position adjustment value
NORMAL(D)
Normal paper back surface, stop position adjustment value
THIN (S)
Thin paper front surface, stop position adjustment value
THIN (D)
Thin paper back surface, stop position adjustment value
Relations between the adjustment value and the document stop position (Varies depending on machines.)
08:
±
0.000mm
00: - 8.000mm
09: + 1.000mm
01: - 7.000mm
10: + 2.000mm
02: - 6.000mm
11: + 3.000mm
03: - 5.000mm
12: + 4.000mm
04: - 8.000mm - 4000
13: + 5.000mm
05: - 8.000mm - 3000
14: + 6.000mm
06: - 8.000mm - 2000
15: + 7.000mm
07: - 8.000mm - 1000
Default: 8
Note
8 – 107
Click on the first or last page to see other AR-280 (serv.man12) service manuals if exist.