Read Sharp AR-205 (serv.man10) Service Manual online
Main
code
code
Sub
code
Contents
Details of operation
Initial
value
value
Set range
26
1
Option switch display
Used to display the installed option on the operation panel. (The LED
corresponding to the installed option is lighted.)
corresponding to the installed option is lighted.)
3
Auditor setting
Used to display the current auditor setting with the numbers at right.
After entering the set value, press the start key, and the set value is
stored.
After entering the set value, press the start key, and the set value is
stored.
0
0
∼
2
5
Counter mode setting
Used to set the print counter mode in A3 or 11"
×
17".
Used to display the currently set counter value with the numbers at right.
After entering the set value, press the start key, and the set value is
stored.
After entering the set value, press the start key, and the set value is
stored.
0
0
∼
3
6
Destination setting
Used to display the current destination setting with the numbers at right.
After entering the set value, press the start key, and the set value is
stored.
After entering the set value, press the start key, and the set value is
stored.
0
0
∼
11
Key operation
Display
Display select:
Magnification
ratio display key
Magnification
ratio display key
<Lighting with an option installed>
When “A” is displayed:
Shifter: Paper empty LED
Job separator: JAM LED
SPF: SPF select LED
RSPF: SPF JAM LED
Duplex mode: Main cassette select LED
Simplex mode: Multi manual paper feed select LED
When “b” is displayed:
Cassette (2nd step): No. 2 cassette select LED
Cassette (3rd step): No. 3 cassette select LED
Cassette (4th step): No. 4 cassette select LED
Memory installed: Paper empty LED
FAX: JAM LED
Printer: Main body JAM LED
ERDH: Main cassette select LED
16CPM: SPF JAM LED
20CPM: SPF select LED
Document sensor: Auto paper select LED
Key operation/Display
0: Built-in auditor
1: Coin vendor
2: Others
Key operation/Display
0: Total/Developer = 2 counts
Maintenance = 2 counts
1: Total/Developer = 1 count
Maintenance = 2 counts
2: Total/Developer = 2 counts
Maintenance = 1 count
3: Total/Developer = 1 count
Maintenance = 1 count
Key operation/Display
0: Japan
6: France (AB series)
1: USA (Inch series)
7: EX inch series
2: Canada (Inch series)
8: EX AB series
3: Germany (AB series)
9: EX inch series (FC conformity)
4: UK (AB series)
10: EX AB series (FC conformity)
5: Australia (AB series)
11: Taiwan, China (AB series)
AR-205
7 – 7
Click on the first or last page to see other AR-205 (serv.man10) service manuals if exist.