AR-205 (serv.man10). AR205 Service Manual-Simulations - Sharp Copying Equipment Service Manual (repair manual). Page 8

Main 
code

Sub 

code

Contents

Details of operation

Initial 
value

Set range

22

15

Trouble memory display

Used to display the actually occurred trouble codes on the display on
the operation panel. When the start key is pressed during the main code
display, the sub code is displayed. Max. 20 recent trouble codes are
stored.

16

Duplex print counter
display
<Only AR-205>

Used to display the current duplex print counter value. 

∗

1

17

Copy counter display

Used to display the current copy counter value. 

∗

1

18

Printer counter display
<Only when an option
is installed>

Used to display the current printer counter value. 

∗

1

19

Electronic sort counter
display <Only when an
option is installed>

Used to display the current electronic sort counter value. 

∗

1

20

FAX print counter display
<Only when an option
is installed>

Used to display the current FAX print counter value. 

∗

1

21

Scanner counter display

Used to display the current scanner counter value.

24

1

JAM memory, JAM
counter clear

Used to clear the JAM memory and the JAM counter. 

∗

2

2

Trouble memory clear

Used to clear the trouble memory. 

∗

2

4

SPF counter clear
<Only when an option
is installed>

Used to clear the SPF counter. 

∗

2

5

Duplex counter clear
<Only AR-205>

Used to clear the duplex counter. 

∗

2

6

Paper feed counter clear

Used to clear the paper feed counter. 

∗

2

7

Drum counter clear

Used to clear the drum counter. 

∗

2

8

Copy counter clear

Used to clear the copy counter. 

∗

2

9

Printer counter clear
<Only when an option
is installed>

Used to clear the printer counter. 

∗

2

10

Electronic sort counter
clear <Only when an
option is installed>

Used to clear the electronic sort counter. 

∗

2

11

FAX print counter clear
<Only when an option
is installed>

Used to clear the FAX print counter. 

∗

2

13

Scanner counter clear

Used to clear the scanner counter. 

∗

2

25

1

Main motor operation
check

Execute the simulation with the developer cartridge removed, and the
main motor will rotate for 30 sec. At that time, the cooling motor rotates
at a low speed.

10

Polygon motor operation
check

Used to drive the polygon motor for 30 sec.

∗

2: Display after clearing each counter 

000 (0.75 sec) 

→

 Blank (0.35 sec) 

→

 000 (0.75 sec) 

→

 Blank (1.0 sec) 

→

 Repetition

Key operation

Display

Sub code display: Start key

Histories 1 

∼

 10: The upper digit of 

  display 

“A” 

∼

 “J” lights up.

Histories 11 

∼

 20: The upper digit of 

  display 

“A” 

∼

 “J” blinks.

Trouble code history
select: Magnification ratio
display key

●

Display without trouble code
Main code: “– –”
Sub code: “00”

AR-205

7 – 6