AR-205 (serv.man10). AR205 Service Manual-Simulations - Sharp Copying Equipment Service Manual (repair manual). Page 6

Main 
code

Sub 

code

Contents

Details of operation

Initial 
value

Set range

3

11

Shifter Home Position
check

Used to drive the shifter motor

7

1

Aging with warmup time
display

Execute the simulation input with the copier side cover open, then close
the side cover, and the machine will start warming up. Warm up time is
counted up every second and it is displayed. After completion of
warmup, count up is terminated. When the clear all key is pressed ready
lamp is lighted and the copy quantity is entered and the start key is
pressed, copying is made to make the set quantity of copies. At that
time, the paper size does not matter.

1 

∼

 99

4

Warmup saving

Used to bring the machine to the ready state without warmup.

1 

∼

 99

6

Intermittent aging

After completion of warmup, counting is stopped and the ready lamp is
lighted. When the copy quantity is entered and the start key is pressed,
copying is made to make the set quantity of copies. After 3 sec standby,
copying is made again to make the set quantity of copies. After that this
operation is repeated. The paper size does not matter.

1 

∼

 99

8

Warmup time display

Execute the simulation input with the copier side cover open, then close
the side cover, and the machine will starts warming up. Warm up time is
counted up every second and it is displayed.

1 

∼

 99

9

1

Duplex motor forward
rotation operation check
<Only AR-205>

Used to rotate the duplex motor forward for 30 sec.

2

Duplex motor reverse
rotation operation check
<Only AR-205>

Used to rotate the duplex motor reversely for 30 sec.

4

Duplex motor rotation
speed adjustment

The currently set duplex motor rotation speed set value is displayed.
When the set value is entered and the start key is pressed, the set
value is stored.

6

1 

∼

 13

5

Duplex motor switchback
time adjustment

The currently set duplex motor switchback time set value is displayed.
When the set value is entered and the start key is pressed, the set
value is stored.

50

18 

∼

 76

10

Toner motor operation
check

Used to operate the toner motor for 30 sec.

Note:

If this simulation is executed with the toner hopper installed, toner
is automatically supplied to the developer. Be careful of overtoner.

14

Trouble (except for U2)
cancel

Used to cancel troubles except for U2.

16

U2 trouble cancel

Used to cancel U2 trouble.

20

1

Maintenance counter clear

Used to clear the maintenance counter. 

∗

2

∗

2: Display after clearing each counter 

000 (0.75 sec) 

→

 Blank (0.35 sec) 

→

 000 (0.75 sec) 

→

 Blank (1.0 sec) 

→

 Repetition

Key operation

Feed: Exposure up key or "3" key
Return: Exposure down key or "4" key
Move to Home Position: Magnification ratio display key or "5" key

Key operation

Copy quantity setting: Copy quantity keys

Key operation

Copy quantity setting: Copy quantity keys

Key operation

Duplex motor rotation speed set value: Copy quantity keys

Key operation

Duplex motor switchback time set value: Copy quantity keys

AR-205

7 – 4