AR-205 (serv.man10). AR205 Service Manual-Simulations - Sharp Copying Equipment Service Manual (repair manual). Page 4

Main 
code

Sub 

code

Contents

Details of operation

Initial 
value

Set range

1

1

Mirror unit operation check

Used to execute scanning at the speed corresponding to the set
magnification ratio.

100%

50 

∼

 200%

2

Optical system sensor
operation check

Used to check MHPS (Mirror home position sensor) ON/OFF state with
the LED on the operation panel.

2

1

SPF aging

Used to perform SPF document transport.
The paper size is not detected. (Excluding postcards, extra large sheet
of 1m or greater.)
With SPF installed: Single transport operation 
With RSPF installed: Duplex transport operation

100%

50 

∼

 200%

2

SPF sensor operation
check

Used to check sensors in SPF with the LED on the operation panel.

3

SPF motor forward
rotation operation check
<Only when an option
is installed>

Used to rotate the SPF motor forward for 10 sec.

4

SPF motor reverse
rotation operation check
<Only when an option
is installed>

Used to rotate the SPF motor reversely for 10 sec.

8

SPF paper feed solenoid
operation check
<Only when an option
is installed>

Used to drive the SPF paper feed solenoid (PSOL) at the cycle of 500
msec ON and 500 msec OFF 20 times.

9

RSPF reverse solenoid
operation check
<Only when an option
is installed>

Used to drive the RSPF reverse solenoid (RSOL) at the cycle of 500
msec ON and 500 msec OFF 20 times.

10

RSPF paper exit gate
solenoid operation check
<Only when an option
is installed>

Used to drive the RSPF paper exit gate solenoid (GSOL) at the cycle of
500 msec ON and 500 msec OFF 20 times.

11

SPF PS release solenoid
operation check
<Only when an option
is installed>

Used to drive the SPF PS release solenoid at the cycle of 500 msec ON
and 500 msec OFF 20 times.

Key operation

Display

Changing the magnification ratio: 
  Fixed 

magnification 

ratio 

key

ZOOM UP KEY, ZOOM DOWN
KEY

Set magnification ratio: 
    Fixed magnification ratio LED
ZOOM LED

Display

<Lighting when the sensor is ON>
MHPS: Paper empty LED

Key operation

Display

Changing the magnification ratio: 
  Fixed 

magnification 

ratio 

key

ZOOM UP KEY, ZOOM DOWN
KEY

Set magnification ratio: 
    Fixed magnification ratio LED
ZOOM LED

Display

<Lighting at sensor ON>
PW1: JAM LED
PW2: Paper empty LED
PW3: Machine position JAM LED
PW4: SPF JAM LED
PL1: Manual paper feed tray select LED
PL2: Second cassette position JAM LED
P-IN: SPF select LED
SPF COVER OPEN: Main cassette select LED

AR-205

7 – 2