AR-5040 (serv.man20). 016-Modification for the Finisher Tray Bounce Problem (PREVIOUSLY SENT OUT AS FF COP 016) - Sharp Copying Equipment Technical Bulletin (repair manual)

ar-5040 (serv.man20) technical bulletin
Model
AR-5040 (serv.man20)
Pages
3 Few pages! See other manuals at the bottom of the first or last page.
Size
150.83 KB
Type
PDF
Document
Technical Bulletin
Brand
Device
Copying Equipment / 016-Modification for the Finisher Tray Bounce Problem (PREVIOUSLY SENT OUT AS FF COP 016)
File
ar-5040-sm20.pdf
Date
Next: Sharp AR-5040 (serv.man21) Technical Bulletin

Read Sharp AR-5040 (serv.man20) Technical Bulletin online

“FAST FACTS”
FOR THE ATTENTION OF THE SERVICE DEPARTMENT
Models : SD-3062  Ref : FF/COP/016 Date : 10/03/97
   AR-5040
Subject : Modification for the finisher tray bounce problem.
Symptom :-
The finisher tray continues to move up and down whilst the machine is in standby.
The finisher tray normally stops when the upper limit swith lever ACC (P/G 50-35) is
actuated. However, if the surface of the elevator guide shaft (P/G 51-47) is worn, the
finisher tray drops slightly after it stops. This causes the upper limit switch lever to be
de-actuated, the machine assumes the finisher tray is not in its home position, and the
tray is driven up again. This cycle repeats until the machine is powered off.
CHANGED PARTS
OLD PART NUMBERS
(P/G 51-47)      
NSFTZ2000FCZZ
        (AN)     ELEVATOR GUIDE SHAFT
(P/G 51-48)     
 LPLTM4482FCZZ       
(AE)     ELEVATOR GUIDE PLATE B
NEW PARTS
NSFTZ2422FCZZ
      (AN)     ELEVATOR GUIDE SHAFT N
CGIDM1762FC01
      (AE)     ELEVATOR GUIDE AS
ADDED PART NUMBERS
PSHEZ4441FCZZ 
    (AG)     SLIDE SHEET FR (2 per pack)
PSHEZ4440FCZZ
     (AE)      SLIDE SHEET C
Action :-
The modification/Service parts above are required to be fitted to any machines
exhibiting the above faults. For full details of the fitting instructions, Click here.
Page 1 of 2
MODIFICATION FITTING INSTRUCTIONS
Model :- SD-3062
Ref. Fast Facts :- FF/COP/016
Date :- 11/03/97
   AR-5040
Page of 3
Display

Download Sharp AR-5040 (serv.man20) Technical Bulletin

Here you can read online and download Sharp AR-5040 (serv.man20) Technical Bulletin in PDF. AR-5040 (serv.man20) technical bulletin will guide through the process and help you recover, restore, fix, disassemble and repair Sharp AR-5040 (serv.man20) Copying Equipment. Information contained in service manuals typically includes schematics / circuit diagrams, wiring diagrams, block diagrams, printed wiring boards, exploded views, parts list, disassembly / assembly, pcb.

Found More:

AR-5040 (serv.man20) Service Manuals

Preview DownloadPagesSize
AR-5040 (serv.man28) 008-Change in the Roller Frame Unit in the Finisher Elevator Frame Unit. Technical Bulletin 2 27.46 KB
AR-5040 (serv.man19) 017-To Prevent Damage to the CCD Harness (PREVIOUSLY SENT OUT AS FF COP 022) Technical Bulletin 2 48.72 KB
AR-5040 (serv.man21) 015-Change in Copier Transportation Method (PREVIOUSLY SENT OUT AS FF COP 012) Technical Bulletin 1 8.74 KB
AR-5040 (serv.man22) 014-Copier Hotline Telephone Number Change (PREVIOUSLY SENT OUT AS FF COP 002) Technical Bulletin 1 10.3 KB
AR-5040 (serv.man23) 013-Measure to Alleviate Problems of Upward and Downward Movement of the Finisher Tray. Technical Bulletin 2 49.38 KB
AR-5040 (serv.man24) 012-Change in Castors Carried Out as a Measure to Improve Productivity. Technical Bulletin 1 17.42 KB
AR-5040 (serv.man25) 011-Change in ROM Version of Model AR5040 Technical Bulletin 2 33.03 KB
AR-5040 (serv.man26) 010-Change in the Original Copy Detection Sheild of the Optical Unit Carried out as a Measure to Improve Productivity. Technical Bulletin 1 18.68 KB
AR-5040 (serv.man27) 009-1 Measure to Alleviate Problems of Diagonal Feeding from the Upper Paper Cassette. 2 Change in the Manual Paper Feeding Lever in the Manual Multi Paper Feeding Unit as a Measure to Improve Productivity. Technical Bulletin 2 27.35 KB
AR-5040 (serv.man2) Change to the paper feed roller material. Technical Bulletin 13 1.22 MB
AR-5040 (serv.man29) 007-The Addition of a Separator Pawl Spacer to the Drum Cleaner Unit. Technical Bulletin 2 31.54 KB
AR-5040 (serv.man30) 006-Changes and Additions to Parts. Technical Bulletin 1 15.02 KB
AR-5040 (serv.man31) 005-Regarding 500 Cassette Paper Feeding Unit use and the Period for Changing the Rollers. Technical Bulletin 3 79.69 KB
AR-5040 (serv.man32) 004-Changes and Additions of Parts. Technical Bulletin 1 18.16 KB
AR-5040 (serv.man33) 003-Changes and Additions of Parts. Technical Bulletin 3 51.11 KB
AR-5040 (serv.man34) 002-Changes and Additions of Parts. Technical Bulletin 7 146.06 KB
AR-5040 (serv.man35) 001-1 Standardizationof the Parts Codes for the IC in the ICU PWB. 2 Prevention of Noise in the Sheild Box. 3 Correction of the Parts Guide. 4 Discontinuance of the Sheild Mylar in the Sheild Box Unit to Improve Productivity. 5 Prevention of Unclean Copies Due to the Curling of the Rear End of the Copy Paper During Double Side Copy Operations. 6 Improvement of Pusher Operations in the Finisher Unit. Technical Bulletin 5 377.95 KB
AR-5040 (serv.man17) 019-New Systems Support Team Systems Support Hotline (PREVIOUSLY SENT OUT AS FF COP 064) Technical Bulletin 1 9.96 KB
AR-5040 (serv.man3) Change of parts (variable resistor) Technical Bulletin 1 6.96 KB
AR-5040 (serv.man4) Establishment of the CG reverse roller shaft UN and the Reverse roller shaft UN in the 550 paper feeding unit as service parts Technical Bulletin 2 52.22 KB
AR-5040 (serv.man5) Supply of paper feeding roller rubbers as separate service packages. (WHITE) Technical Bulletin 1 74.93 KB
AR-5040 (serv.man6) Change In The Magnetic Clutch Of Paper Feeding Unit In The 500 Tray To Improve Productivity. (WHITE) Technical Bulletin 2 103.1 KB
AR-5040 (serv.man7) 1.Change In The Material Used For The Attachment Plate Of The guide Switch In The Transport Unit Carried Out As A Measure To Improve Productivity. 2.Change In The Material Of The Lower Guide Of The 500 Tray Paper Feeding Unit Carried Out As A Measure To Improve Productivity. 3.Change In The Shape Of The ADU Of The Roller Arm Carried Out As A Measure To Improve Productivity. (WHITE) Technical Bulletin 3 79.15 KB
AR-5040 (serv.man8) 1.Change In The Screws In The Optical Unit Carried Out As A Measure To Improve Productivity. 2.Measure To Alleviate Problems Of Oil Oozing From The Bushing In The Developing Unit. 3.Addition Carried Out Of An ICU Cover Sheet. 4.Measure To Improve Operation Stability Of The Shutter In The Toner Box. 5.Change Carried Out In The Maker Carried Out As A Measure To Improve Productivity. (WHITE) Technical Bulletin 3 93.37 KB
AR-5040 (serv.man9) Parts Interchangeability - 500 Sheet Tray Feed Unit. (WHITE) Technical Bulletin 4 108.66 KB
AR-5040 (serv.man10) 1.Change Carried Out In The Parts Used In The Tray Drawer Unit. 2.Change Carried Out In The Parts Used In The Tray Assembly Drawer Unit. 3.Change Carried Out In THe Parts Used In The ADU Unit. (WHITE) Technical Bulletin 4 108.99 KB
AR-5040 (serv.man11) 1.Measure To Stabilise The Return Of The PPD1 Actuator. 2.Measure To Alleviate Problems Of Diagonal Feeding Of The Original Documents In The ADF. 3.Change In The Attachment Screws Of The Fan Attachment Base Plate Carried Out As A Measure To Improve Operation. 4.Change In The Part Code Carried Out In Accordance With A Change In The Maker (Action Carried Out As A Measure To Improve Productivity). (WHITE) Technical Bulletin 3 62.17 KB
AR-5040 (serv.man12) 1.Change Carried Out In The Printed Content Of The MSDS Card. 2.Measure To Prevent Chafing Of The Copy Paper. 3.Measure To Alleviate Problems Of Abnormal Noise From The Copy Paper Feed Drive Unit. (WHITE) Technical Bulletin 3 63.8 KB
AR-5040 (serv.man13) 1.Changes Carried Out In The Finishing Unit As A Measure To Improve Productivity. 2.Correction Carried Out In The Parts Guide. (WHITE) Technical Bulletin 2 64.43 KB
AR-5040 (serv.man14) 1.Measure To Prevent The CL Lead Wire From Lifting Up. 2.Measure To Prevent Contact With The Home Position Sensor Detection Plate In The Scanner Unit. (WHITE) Technical Bulletin 2 46.6 KB
AR-5040 (serv.man15) Parts Addition - Scanner Unit. (WHITE) Technical Bulletin 1 39.8 KB
AR-5040 (serv.man16) 020-Sharp UK Technical Website (PREVIOUSLY SENT OUT AS FF COP 075) Technical Bulletin 1 14.75 KB
AR-5040 (serv.man18) 018-EPROM Upgrade Exchange Scheme (PREVIOUSLY SENT OUT AS FF COP 062) Technical Bulletin 1 10.34 KB
AR-5040 AR5040 Handy Guide Handy Guide 2 17.18 KB
AR-5040 (serv.man36) MSDS F-0451 Regulatory Data 2 278.4 KB
AR-5040 (serv.man37) MSDS F-3451 Regulatory Data 2 247.11 KB
AR-5040 (serv.man38) Environmental Data Sheet Regulatory Data 1 4.72 KB
AR-5040 (serv.man39) Packaging Weights Data Regulatory Data 1 5.42 KB

Random: