AR-205 (serv.man10). AR205 Service Manual-Simulations - Sharp Copying Equipment Service Manual (repair manual). Page 11

Main 
code

Sub 

code

Contents

Details of operation

Initial 
value

Set range

26

51

Sort/Group copy
temporary stop function
setup
<Only when an option
is installed>

Used to set whether temporary stop for every 250-sheet print (150-sheet
print when the job separator is installed) is made or not during copying
with the sort/group function. The current setup is displayed with the
following numbers. After entering the set value, press the start key to
store the set value.

1

0.1

30

1

Machine sensor operation
check

Used to check the sensors in the machine transport system with LED on
the operation panel.

41

2

OC document sensor
adjustment
<Other than AR-160>

Used to read the document sensor input value with paper and perform
the sensor detection level adjustment. For the adjustment procedure of
the document sensor input value, refer to the previous descriptions.

41

3

Document sensor light
reception level display

Used to display the light reception level and the detection level of the
document sensor. (The sensor level adjusted with SIM 41-2 is displayed.)

42

1

Developing counter clear

Used to clear the Developing counter. 

∗

2

43

1

Fusing temperature setting

Used to display the current setting of the fusing temperature at right.
After selecting the fusing temperature with the magnification ratio display
key, press the start key, and the set value is stored. The set range is
155 

∼

 190˚C. Use the magnification ratio key to adjust the value by –5˚C.

180

155 

∼

 190

46

1

Copy density level
adjustment

After completion of warmup, shading is performed and the currently set
copy density level is displayed. For the adjustment procedure, refer to
the previous descriptions.

48

1 

∼

 99

∗

2: Display after clearing each counter 

000 (0.75 sec) 

→

 Blank (0.35 sec) 

→

 000 (0.75 sec) 

→

 Blank (1.0 sec) 

→

 Repetition

Key operation/Display

0: Does not stop.

1: Stops.

Display

<Lighting at sensor ON>

Paper entry sensor: Machine position JAM LED

Duplex sensor: SPF JAM LED <Only AR-205>

Paper exit sensor: JAM LED

No. 2 cassette transport sensor: No. 2 cassette position LED

No. 3 cassette transport sensor: No. 3 cassette position LED
<Only when an option is installed>

No. 4 cassette transport sensor: No. 4 cassette position LED
<Only when an option is installed>

Drum initial SW: DRUM LED

Key operation

Display

Light reception/Detection
level select: Magnification
ratio display key

Display at the 3rd digit
“A”:

Light reception level display

“b”:

Document detection level display

Sensor select: Auto
magnification ratio select key

Sensor A: A3 (11 

×

 17) document

size LED
Sensor B: A4 (8 1/2 

×

 14) document

size LED
Sensor C: A4R (8 1/2 

×

 11)

document size LED
Sensor D: B4 (8 1/2 

×

 5 1/2)

document size LED

Key operation

Fusing temperature select: Magnification ratio display key

Key operation

Display

Mode select:
Exposure mode select
key
Copy density level:
Copy quantity keys

<LED lighting at each mode selection>

Auto mode: AUTO LED

Manual mode: MANUAL LED

Photo mode: PHOTO LED

Toner save mode: MANUAL + PHOTO LED

AETS mode: AUTO + PHOTO LED

AR-205

7 – 9