Read Sharp PN-ZB01 (serv.man2) Service Manual online
CHAPTER 7. PN-E601/E521 DISASSEMBLY AND ASSEMBLY
PN-E601 PN-E601/E521 DISASSEMBLY AND ASSEMBLY
7 – 13
11. INVERTER PWB
■ PN-E601
1 ) Unscrew 8pcs of Screw (M3 x 6 (Silver)). Remove the Speaker angle R and Speaker angle L.
CAUTION
NOTE FOR ASSEMBLY
n
Tighten the screw in the sequence of
1, 2, 3,and 4.
SCREW TIGHTENING TORQUE
n
Screw: 0.7 - 0.9N •m
2 ) Disconnect 4 connectors. Unscrew 12pcs of Screw (M3 x 6s/sw (Silver)). Slide the INVMAST board and INVSLAV board towards the center of
LCD module to remove them.
CAUTION
NOTE FOR ASSEMBLY
n
Slide and insert the INVMAST board and INVSLAV board into the lamp sockets.
n
After inserting the board, confirm that the relay harness connector is properly engaged.
SCREW TIGHTENING TORQUE
n
0.7 - 0.9N •m
3
2
1
4
1
4
2
3
Lamp socket
Connector x 4
Interface harness connector x 2
Screw x 12
A
B
Click on the first or last page to see other PN-ZB01 (serv.man2) service manuals if exist.