PN-ZB01 (serv.man2) - Sharp Monitor Service Manual (repair manual). Page 123

PN-E601　PN-E601/E521 DISASSEMBLY AND ASSEMBLY

 7 – 15

■ PN-E601

1 ) Remove 11pcs of Clamp.  Unscrew 10pcs of Screw (M4 x 6 (Silver)), and remove the Cabinet fixing plate UD and Cabinet fixing plate LR.

Unscrew 1pcs of Screw A (M4 x 6 (Silver)), unscrew 1pcs of Screw B (M3 x 6 (Silver)), and unscrew 1pcs of Screw D (M4 x 8 (Silver)).
Remove KEY cable protect sheet A, KEY cable protect sheet B ,and Key cable FPC. 

Unscrew 2pcs of Screw A (M3 x 6 (Silver)) and remove the C-PWB Cover.  Unscrew 6pcs of Screw B (M4 x 6 (Silver) ) and remove the Stand

fixing plate.

n

Beware of the orientation of the opening of Clamp, and turn it 90 degrees to fix.

n

Attach the Cabinet fixing plate UD/LR with the dowel engaged.

n

Confirm that the FPC is securely inserted to the C-PWB.

n

Do not slide the C-PWB Cover when it is in touch with the heat radiating sheet of C-PWB.  
(It may cause the heat radiating sheet to be peeled off.)

n

Make sure to insert the top of Stand fixing plate into the part D of LCD Module as shown above.  Make sure no displacement occurs.

n

Bend the Key Cable FPC along the marking to carry out wiring properly.

n

When wiring the Key Cable FPC on the Stand fixing plate, ensure that it is in close contact with the Stand fixing plate.

n

Screw A: 0.9 - 1.1N •m

n

Screw B: 0.7 - 0.9N •m

n

Screw C, Screw D: 0.9 - 1.1N •m

Clamp x 11

Cabinet fixing plate UD

Boss

Cabinet fixing plate LR

Dove

Dove

Part E

Screw  A x 10

Screw  A

Screw  C x 6

Locationg points

Opening

Opening

Key cable FPC

Tape

Tape

Stand fixing plate

LCD

Affix the tape 
carefully to avoid 
it from covering 
the holes.

Screw  B x 2

Screw  B

Screw  D

Screw  A

KEY cable 
protect sheet B

KEY cable 
protect sheet A