Read Sharp PN-ZB01 (serv.man2) Service Manual online
CHAPTER 7. PN-E601/E521 DISASSEMBLY AND ASSEMBLY
PN-E601 PN-E601/E521 DISASSEMBLY AND ASSEMBLY
7 – 16
■ PN-E521
1 ) Remove 21pcs of Clamp. Unscrew 10pcs of Screw A(M4 x (Silver)), and remove the Cabinet fixing plate U,the Cabinet fixing plate UD ,and
Cabinet fixing plate LR.
Unscrew 1pcs of Screw A (M4 x 6 (Silver)), unscrew 1pcs of Screw B (M3 x 6 (Silver)), and unscrew 1pcs of Screw D (M4 x 8 (Silver)).
Unscrew 1pcs of Screw A (M4 x 6 (Silver)), unscrew 1pcs of Screw B (M3 x 6 (Silver)), and unscrew 1pcs of Screw D (M4 x 8 (Silver)).
Remove KEY cable protect sheet A, KEY cable protect sheet C ,and Key cable FPC.
Unscrew 4pcs of Screw B (M3 x 6(Silver)) and remove the C-PWB Cover. Unscrew 6pcs of Screw C (M4 x 6(Silver) ) and remove the Stand
fixing plate.
fixing plate.
CAUTION
NOTE FOR ASSEMBLY
n
Beware of the orientation of the opening of Clamp, and turn it 90 degrees to fix.
n
Attach the Cabinet fixing plate U/UD/LR with the dowel engaged.
n
Confirm that the FPC is securely inserted to the C-PWB.
n
Do not slide the C-PWB Cover when it is in touch with the heat radiating sheet of C-PWB.
(It may cause the heat radiating sheet to be peeled off.)
n
Make sure to insert the top of Stand fixing plate into the part E of LCD Module as shown above. Make sure no displacement occurs.
n
Bend the Key Cable FPC along the marking to carry out wiring properly.
n
When wiring the Key Cable FPC on the Stand fixing plate, ensure that it is in close contact with the Stand fixing plate.
SCREW TIGHTENING TORQUE
n
Screw A: 0.9 - 1.1N •m
n
Screw B: 0.7 - 0.9N •m
n
Screw C, Screw D: 0.9 - 1.1N •m
3
2
1
4
Clamp x 21
C-PWB cover
Speaker angle L
Cabinet fixing plate U
Opening
Opening
Cabinet fixing plate LR
Cabinet fixing plate UD
Cabinet fixing plate UD
Dove
Screw A x 10
Dove
Dove
Screw A
Screw A
Screw D x 4
Part E
Screw C x 6
Locationg points
Tape
Stand fixing plate
LCD
Key cable FPC
Tape
Affix the tape
carefully to avoid
it from covering
the holes.
carefully to avoid
it from covering
the holes.
KEY cable
protect sheet A
protect sheet A
Screw B
Screw A
Screw D
KEY cable
protect sheet C
protect sheet C
Click on the first or last page to see other PN-ZB01 (serv.man2) service manuals if exist.