Read Sharp LL-T2000A (serv.man9) Service Manual online
LL-T2000A
1 – 1
CHAPTER1. OUTLINE OF THE PRODUCT, NOMENCLATURE AND FUNCTION
1. SPECIFICATIONS
■
■
■
■
PRODUCT SPECIFICATIONS
• LCD display
19.6 inches (50 cm measured diagonally)
Anti Glare Low Reflection TFT LCD module
• Resolution (max.)
UXGA 1600
u
1200 pixels
• Displayable colors (max.)
16.77 million colors (8 bit)
• Brightness (max.)
200cd/m
2
• Dot pitch
0.249 (H) 0.249 (V) mm
• Contrast ratio
300 : 1
• Angle of visibility
Left-right 150° ; Up-down 150°
• Screen display size
Horizontal 398.4 mm
u
Vertical 298.8 mm
• Video signal
Analog RGB (0.7Vp-p) [75
Ω
]
• Sync signal
Separate Sync (TTL level: +/-), Sync on Green,
Composite Sync (TTL level: +/-)
• Expansion compensation
Digital screening
(enlargement of display to correct VGA/SVGA/XGA/SXGA)
• Plug & Play
VESA:
DDC1/DDC2B compatible
• Power management
VESA:
based on DPMS
• Input signal terminal
2
u
15 pin mini D-sub (3 rows)
• USB hub function
1 upstream port, 2 downstream ports
(bus-powered hub based on USB standard Rev 1.1)
• Screen tilt
Upward 0° - 30°
; downward 0° - 5°
• Screen swivel
90° from left through right
• Power supply
AC100-240V, 50/60Hz
(Use special AC adapter, type NL-A51J of Sharp Corporation.)
• Temperature of operating environment
5 - 35° C
• Power consumption
Maximum 48W (3.5W when in power-saving mode)
(Use special AC adapter.)
• Dimensions (W
u
D
u
H)
483 mm
u
218 mm
u
478 mm
• Weight (excluding AC adapter)
Approx. 10.5 kg
■
■
■
■
DIMENSIONS (Units: mm)
Special AC adapter
Length of analog signal cable: approx. 2.0 m*
Length of USB cable included: approx. 1.8 m
Length of USB cable included: approx. 1.8 m
*Length from analog signal input terminal
483
397
478
Approx. 1.8 m
Approx. H 140 mm
u
D 70 mm
u
H 41 mm
Click on the first or last page to see other LL-T2000A (serv.man9) service manuals if exist.