LL-T2000A (serv.man9). Complete - Sharp Monitor Service Manual (repair manual). Page 9

LL-T2000A

2 – 5

5.  In [Options], check [Automatically detect Plug & Play monitors]

and click on [Change].

6.  Check [Specify the location of the driver [Advanced]] and click

[Next].

7.  Check [Display a list of all the drivers in a specific location, so you

can select the driver you want.] and click [Next].

8.  When [Models] is displayed, click on [Have disk], confirm that

[Copy manufacturer's files from:] is [A:], and click [OK].

9.  Select the monitor details, then click [Next], [Next], and [Finish].

10. Check that the monitor details are displayed, then click [Apply].

11. Click [OK], and close the window.

12. Remove the Utility Disk from the A drive.

Installing the monitor's ICC profile. (If the set-up information has
already been installed, so too has the profile, and there is no need to
install it.)
This explanation assumes that the floppy disk drive is "A drive".

1.  Place the Utility Disk in the computer's A drive.

2.  Click on the [Start] button. From [Settings], choose [Control

Panel].

3.  Double click on [Display].

4.  Click on [Settings] and [Advanced].

5.  Click on [General] and from [Compatibility] select [Apply the new

display setting without restarting], then click on [Color Manage-
ment].

6.  Click [Add], and select [3 

1

/

2

 Floppy [A:]] as the file location.

7.  Choose the color profile that you would like to install, and click on

[Add].

8.  Choose the profile and click on [Set As Default].

9.  Click [OK], and close the window.

10. Remove the Utility Disk from the A drive.

• When using the ICC profile, please set the [WHITE BALANCE] to

[STD] and the [COLOR MODE] to [OFF].

ColorSync is the Apple Corporation's color management system and
is a function that enables color resolution to be realized when used
with a compatible application. A ColorSync profile describes the color
characteristics of the LCD monitor. 

Notes: • This monitor's ColorSync profile works with MacOS8.5 or

above.

•  When using the ColorSync profile, please set the [WHITE

BALANCE] to [STD] and the [COLOR MODE] to [OFF].

Notes: • A floppy disk drive is necessary. In addition, it is necessary

to have PC Exchange or File Exchange installed in your sys-
tem.

•  Depending on the type of computer or OS, command names

and methods may differ. Please follow the computer's own
operation manual while reading this.

1.  Place the Utility Disk (provided) into the computer's floppy disk drive.

2.  Copy the profile to be used from the Mac folder on the Utility Disk

to the ColorSync profile folder located within the system folder.

3.  Using the ColorSync on the control panel, choose the profile to be

used.

If necessary, the screen can be adjusted as follows.

The CLOCK, PHASE, H-POS (horizontal positioning) and V-POS (ver-
tical positioning) functions can be adjusted automatically.

Brightness of backlight can be adjusted.

Fine adjustments can be made using the On Screen Display (OSD)
Menu.

Note:

• All adjustments will be saved even after turning the power off.

■

■

■

■

MENU 1 (ADJUSTMENT) values can be returned to their original ex-
factory values in one command.

1.  Turn on the monitor power. 

2.  Press the MENU button and the 

e

 button simultaneously. When

[RESET] appears on the screen, the reset is complete.

■

■

■

■

All adjustment values can be returned to their original ex-factory val-
ues in one command.

1.  Turn off the monitor power.

2.  Press the MENU button and the SELECT button simultaneously,

and while doing this press the power button (i.e. turn the power
on). When [ALL RESET] appears on the screen, the reset is com-
plete.

Notes: • While ALL RESET is displayed, the control buttons are dis-

abled.

•  It is not possible to reset values when the adjustment lock is

in place. Remove the adjustment lock before attempting to
operate control buttons.

■

■

■

■

By disabling the control buttons (i.e. setting the lock) any attempted
changes to adjusted values will be voided.

1.  Turn off the monitor power.

2.  While pressing the MENU button, press the power button (i.e. turn

the power on). This will set the lock. (When this appears on the
screen, the lock is in place.)

If the lock is in place and the above-mentioned command is repeated,
the lock will be removed.

Note:

• When the lock is in place, all buttons other than the power

button are disabled.

■

■

■

■

Messages displayed on the screen and OSD Menu contents can be
changed to the following languages.

Dutch, English, French, German, Spanish, Italian, Swedish.

1.  Turn off the monitor.

2. Pressing 

the 

e

 and 

d

 buttons simultaneously, press the power but-

ton (i.e. turn the power on). 

The Language Selection Menu (LANGUAGE) will be displayed on
the screen.

3.  Use the SELECT button to choose a language.

4.  Press the MENU button.

The setting is complete. From now, messages and adjustment
menus will be displayed in the chosen language.