LL-T2000A (serv.man9). Complete - Sharp Monitor Service Manual (repair manual). Page 10

LL-T2000A

2 – 6

Options in MENU 1 (ADJUSTMENT) can be adjusted automatically

(CLOCK, PHASE, H-POS, V-POS).

Note:

• When setting up the monitor or a connected computer for the

first time, connecting an additional computer or after having

changed an aspect of the current system, perform an auto-

matic screen adjustment before use.

■

■

■

■

To perform an automatic adjustment, first display an image that makes
the entire screen very bright. If you are using Windows, you can also

use the Adjustment Pattern on the accompanying Monitor Settings

Adjustment Disk for Windows.

This explanation is for Windows 95/98/2000, and assumes that the
floppy disk drive is [A drive].

Note:

• If the floppy disk drive of your computer is not "A drive",

please read the below substituting the floppy disk drive you
are using in place of "A drive" or "A".

1.  Place the Monitor Settings Adjustment Disk (provided) into the

computer's A drive.

2.  Open [My Computer] and select [3 Floppy (A:)]. If using Windows

3.1, open [File Manager] and choose "A drive".

3.  Double click on [Adj_uty.exe] to run the Adjustment Program. The

Adjustment Pattern will appear.

Notes: • After completing the adjustment, press the computer's [Esc]

key to exit the Adjustment Program.

• If your computer's display mode is set to 65K colors, you

may see the different color levels in each color pattern or the

gray scale may look colored. (This is due to the input signal
specification and is not a malfunction.)

■

■

■

■

1.  Press the MENU button.

The ADJUSTMENT Menu will be displayed.

2. Press 

the 

d

 button.

The screen will become dark and [ADJUSTING] will be displayed. 
After a few seconds the ADJUSTMENT Menu will return. (The

automatic adjustment is now complete.)

3.  Press the MENU button 4 times to make the On Screen Display

(OSD) Menu disappear.

Notes: • In most cases the monitor is ready to be used after auto-

matic adjustment.

•  If necessary due to any of the following, manual adjustments

(p. 19) can be made after the automatic adjustment.

•  When further fine adjustment is needed.

• When the computer's video input signals are Composite

Sync or Sync On Green. (Automatic adjustments may not
be possible.)

•  When, after command 2 above, [OUT OF ADJUST] is dis-

played. (When the screen displays an entirely dark image,
the automatic screen adjustment may be disabled. When
making an automatic adjustment, be sure to either use the
Adjustment Pattern or try displaying an image that makes
the entire screen very bright.)

The backlight brightness can be adjusted.

Carry out the commands without the On Screen Display (OSD) Menu

displayed. If the OSD Menu is displayed, press the MENU button (sev-
eral times may be required) and begin when the OSD Menu has disap-

peared.

1.  Without the OSD Menu being displayed, push the 

e

 or the 

d

 but-

ton. At the bottom of the screen the BRIGHT bar will appear.

2.  Adjust by pressing the 

e

 button (darker) or 

d

 button (lighter).

The BRIGHT bar automatically disappears approximately 3 seconds
after the last command.

Fine adjustments can be made using the On Screen Display (OSD)

Menu provided.

MENU 1:

ADJUSTMENT

CLOCK, PHASE, H-POS (horizontal positioning) and V-
POS (vertical positioning)

MENU 2:

GAIN CONTROL

BRIGHT (brightness), CONT (contrast)

MENU 3:

WHITE BALANCE

R-CONT (blue-green to red), G-CONT (purple to green), 
B-CONT (yellow to blue)

MENU 4:

MODE SELECT

INPUT (input mode), 400LINE (resolution), EXPAND

(screen expansion), LEVEL (level of scaling)

■

■

■

■

If using Windows, the Adjustment Pattern on the accompanying Moni-
tor Settings Adjustment Disk for Windows can be used.

If using a computer other than Windows, the adjustment pattern can-

not be used. Display an image that makes the entire screen very

bright, and adjust while watching the screen.

Note:

• This explanation is based on using the Adjustment Pattern

(for Windows) to make adjustments.

Adjustment pattern