Read Sharp ER-A750 (serv.man7) User Guide / Operation Manual online
9
You can specify whether the system retry function is disabled or enabled if the communication
between machines does not end successfully.
1.
Enter the PGM2 mode.
2.
Select “INLINE SETTING” and press the
key.
The INLINE SETTING window will open.
3.
Move the cursor to the “SYSTEM RETRY” line.
Select “DISABLE” or “ENABLE” with the
key
(toggle key) and press the
key.
• If the system retry function is enabled, a transmission job with which an error has occurred is
not finalized immediately, but the master waits for selection of one of the three commands
(RETRY, ABORT and IGNORE) through the keyboard or menu. Then the master retries
access to the satellite that has caused the transmission error or terminates the access as a
successful or unsuccessful transmission depending on the selection made.
• If the function is disabled, the job is terminated immediately.
• For further information, see “System retry function” on pages 64–65.
• The default setting is “ENABLE”
NOTE
ENTER
•
ENTER
5. Specifying whether to enable or disable the system retry function
when a transmission error occurs – master and satellite
*ER-A750 97.4.1 3:57 PM Page 9
Click on the first or last page to see other ER-A750 (serv.man7) service manuals if exist.