Read Sharp ER-A750 (serv.man7) User Guide / Operation Manual online
10
You can specify whether the entry function of a satellite is disabled (LOCK UP) or enabled
(CONTINUE) when the T-LOG buffer is full. If it is disabled, an error message will be displayed
when you try any entry in the REG/MGR mode at the satellite. If it is enabled, you can continue
entries but cannot save the entered data. Even if data is entered after the T-LOG buffer becomes
full, the data saved in the file will not be erased.
1.
Enter the PGM2 mode.
2.
Select “INLINE SETTING” and press the
key.
The INLINE SETTING window will open.
3.
Move the cursor to the “T-LOG FULL” line.
4.
Select “CONTINUE” or “LOCK UP” with the
key
(toggle key) and press the
key.
• The T-LOG buffer is provided in each satellite to store the data to be transmitted to the master
by T-LOG polling. The data is automatically transmitted to the master in the open store state.
For more information about T-LOG polling, see “T-LOG polling” on page 36.
• When the entry function is disabled, “LOCK UP” will be printed on the receipt.
• When the entry function is enabled, “CONTINUE” will be printed on the receipt.
• The default setting is “CONTINUE”.
NOTE
ENTER
•
ENTER
6. Specifying whether to enable or disable the entry function
when the T-LOG buffer is full – master and satellite
*ER-A750 97.4.1 3:57 PM Page 10
Click on the first or last page to see other ER-A750 (serv.man7) service manuals if exist.