Read Sharp ER-A750 (serv.man7) User Guide / Operation Manual online
7
• The terminal numbers and machine numbers of the master and satellites must be entered into
the master list for inline communications.
• The terminal numbers and machine numbers of up to 16 machines (one master and 15
satellites) can be entered into the master list.
• The terminal number should be within the range from 1 to 254 and the machine number from 1
to 999999.
• No satellite can perform inline communications unless its terminal and machine numbers are
present in the master list.
• If a machine number which already exists in the master list is entered, a lock error will occur
even when the corresponding terminal number does not exist in the list.
(2) Deleting a machine from the master list (subwindow program)
To delete a terminal number from the master list, proceed as follows:
1.
Select “PGM2 MODE” from the mode selection window and press the
key to enter
the PGM2 mode.
2.
Select “INLINE SETTING” and press the
key. The INLINE SETTING window will
open.
3.
Press the
key. The subwindow for the master list will open.
4.
Enter the terminal no. to be deleted and press the
key.
5.
The machine will ask you as follows: “ARE YOU SURE?” If you are sure to delete it,
select “YES”. If not, select “NO”.
• You can delete any of the terminal numbers that are in the master list.
NOTE
DEL
TL
ENTER
ENTER
NOTE
*ER-A750 97.4.1 3:57 PM Page 7
Click on the first or last page to see other ER-A750 (serv.man7) service manuals if exist.