Read Sharp ER-A750 (serv.man7) User Guide / Operation Manual online
4
First, turn on the machines in the IRC system and put them in the PGM2 mode. The
programming procedures for both the master and satellites will be explained below.
It is necessary to assign machine numbers to the master and satellites before the IRC
programming.
1.
Select “PGM2 MODE” from the mode selection window
and press the key to enter the PGM2 mode.
2.
Select “SETTING” and press the key.
3.
Select “REGISTER” and press the key. The
REGISTER window will open.
Select “MACHINE#” from the REGISTER window and
press the key.
4.
Enter a machine number and press the key.
Machine number: up to 6 digits (0–999999)
5.
Repeat steps 1 to 4 for all machines in the IRC system.
In an IRC network, each machine number must be unique.
Do not use the same number for more than one machine.
NOTE
ENTER
ENTER
ENTER
ENTER
ENTER
IRC Programming
1
1. Setting the machine numbers – master and satellite
*ER-A750 97.4.1 3:57 PM Page 4
Click on the first or last page to see other ER-A750 (serv.man7) service manuals if exist.