Read Sharp ER-A750 (serv.man7) User Guide / Operation Manual online
13
When you have completed the IRC programming, distribute the IRC preset data from the master
to all satellites in the IRC system.
(1) Initial downloading
For initial setup of the IRC system, use this downloading method. The preset data in the
master is downloaded to each satellite, when the existing preset data in the satellite is
cleared.
1.
Enter the PGM2 mode.
2.
Select “INITIAL D/L” and press the
key.
The INITIAL D/L window will open.
3.
In order to distribute all preset data files in the master
to satellites, select “ALL PGM” and press the
key.
In order to distribute an individual preset data file,
select the corresponding item and press the
key.
If needed, enter the code range.
4.
If you wish to download the IRC programming data to
all satellites, select “ALL” and press the
key. If you
wish to download the data to certain satellite(s), select
“MACHINE SELECT” and press the
key. In this
case, the MACHINE SELECT window will open. Move
the cursor to the desired machine number and select
“YES”.
• Check the contents of the programming of all the satellites in the IRC system that have
received the preset data.
• If you want to download by entering a job code, enter a job code listed in the table on page
15 and press the
key and the
key in the PGM2 mode window.
•
NOTE
ENTER
ENTER
ENTER
ENTER
ENTER
8. Downloading the contents of the IRC programming to
satellites – master
*ER-A750 97.4.1 3:57 PM Page 13
Click on the first or last page to see other ER-A750 (serv.man7) service manuals if exist.