Read Panasonic NC-PH30ZTW (serv.man2) Service Manual online
10
4.3.
Feed water pipe
1. Remove 1 screw off.
2. Remove bushing from water pipe packing A and con-
2. Remove bushing from water pipe packing A and con-
tainer comp.
3. Remove feed water pipe from communicating bushing.
4.4.
Thermal fuse comp. and Thermistor comp.
1. Remove 2 screws of cover plate.
2. Remove white, orange and yellow lead wire of heater ter-
2. Remove white, orange and yellow lead wire of heater ter-
minal.
3. Remove cover plate from container.
4. Remove thermal fuse comp. from cover plate.
5. Remove hold spring A from cover plate.
6. Rotate thermistor assy. 90° to remove it.
4. Remove thermal fuse comp. from cover plate.
5. Remove hold spring A from cover plate.
6. Rotate thermistor assy. 90° to remove it.
Operating point
• Careful thermistor leans when assemble with cover plate.
• Do not forget to put compound.
• Remove white, orange and yellow lead wires with wrench
• Do not forget to put compound.
• Remove white, orange and yellow lead wires with wrench
Click on the first or last page to see other NC-PH30ZTW (serv.man2) service manuals if exist.