Read Panasonic NC-PH30ZTW (serv.man2) Service Manual online
13
4.7.
How to remove Decoration panel (Display Part)
1. Open (A-point) with minus screwdriver of small pin.
4.8.
Peg frame
1. Remove body follow the instruction.
2. Remove bottom ring upside with minus screwdriver or
2. Remove bottom ring upside with minus screwdriver or
etc.
3. Remove 1 screw off.
4. Use minus screwdriver to pry between 2 ribs of peg frame
4. Use minus screwdriver to pry between 2 ribs of peg frame
and body, and then push out peg frame with thumb, then
pull it off.
pull it off.
Click on the first or last page to see other NC-PH30ZTW (serv.man2) service manuals if exist.