Read Panasonic NC-PH30ZTW (serv.man2) Service Manual online
9
4 Disassembly and Assembly Instructions
4.1.
Bottom plate and Body
1. Remove 2 tapping screws and 1 truss screw from bottom
plate.
2. Remove 1 screw and sleeve from body.
3. Remove white, orange lead wire and earth wire from peg
3. Remove white, orange lead wire and earth wire from peg
frame.
4. Remove body off.
5. Remove waterproof cover B.
5. Remove waterproof cover B.
4.2.
Board holder A comp.(Lower part)
1. Remove 3 waterproof claws and then open waterproof.
2. Remove all, connector, fasten terminal and lead wire assy
2. Remove all, connector, fasten terminal and lead wire assy
E which wiring on board holder A comp. (lower part).
Operating point
• Fasten terminal which has stopper, should to push arrow-
point part and pull off together.
Click on the first or last page to see other NC-PH30ZTW (serv.man2) service manuals if exist.