Read Panasonic NC-PH30ZTW (serv.man2) Service Manual online
12
4.6.
Control unit B comp.
1. Remove 2 screws off.
2. Remove board holder B off. (Pull upside)
3. Pull off lead wire assy E.
4. Remove LED holder off.
5. Lean board holder B claw and pull control unit B to
2. Remove board holder B off. (Pull upside)
3. Pull off lead wire assy E.
4. Remove LED holder off.
5. Lean board holder B claw and pull control unit B to
remove.
Operating point
• When remove board holder B, please do in 1 set in order to
not forget Seal packing F.
Click on the first or last page to see other NC-PH30ZTW (serv.man2) service manuals if exist.