Read Panasonic WV-CS950 / WV-CS954E Service Manual online
2-6
8
Referring to Fig. 2-18, remove two screws that secure the
Lens Shield Cover from the Lens Chassis of the Camera
Unit.
Lens Shield Cover from the Lens Chassis of the Camera
Unit.
8
Referring to Fig. 2-19 and Fig. 2-20, remove three screws
that secure the Camera Head and remove the Camera
Head from the Lens Chassis.
that secure the Camera Head and remove the Camera
Head from the Lens Chassis.
Fig. 2-18
8
Reconnect the Cables of the Power Unit to CN2, CN3,
CN5 on the Communication Board.
CN5 on the Communication Board.
8
Reconnect the Cable of the Slip Ring to CN7 on the
Communication Board.
Communication Board.
8
Reconnect the Flexible Flat Cable between CN4 on the
Main Board and CN1 on the Servo Board.
Main Board and CN1 on the Servo Board.
8
Reconnect the Flexible Flat Cable between CN204 on the
Main Board and CN400 on the Tilt Board.
Main Board and CN400 on the Tilt Board.
8
Supply the power to the Camera.
8
Contact the magnet to VS1 on the Servo Board.
Fig. 2-19
Fig. 2-20
Lens Chassis
Lens Shield Cover
Remove two screws.
Camera
Head
Head
Remove three screws.
Lens Chassis
Main Board
(Camera Head is removed.)
Click on the first or last page to see other WV-CS950 / WV-CS954E service manuals if exist.