Read Panasonic WV-CS950 / WV-CS954E Service Manual online
2-5
8
Referring to Fig. 2-13, remove one E Ring that secure the
Tilt Gear Ass'y and remove the Tilt Gear Ass'y from the
Mechanical Unit.
Tilt Gear Ass'y and remove the Tilt Gear Ass'y from the
Mechanical Unit.
8
Remove the Camera Unit from the Mechanical unit.
8
Referring to Fig. 2-15, remove two screws that secure the
Front Lens Cover and remove the Front Lens Cover from
the Camera Unit .
Front Lens Cover and remove the Front Lens Cover from
the Camera Unit .
Fig. 2-13
8
Referring to Fig. 2-16, remove two screws that secure the
Rear Lens Cover and remove the Rear Lens Cover from
the Camera Unit.
Rear Lens Cover and remove the Rear Lens Cover from
the Camera Unit.
8
Referring to Fig. 2-17, disconnect two connectors (CN204
on the Main Board and CN400 on the Tilt Board) and
remove the Flexible Flat Cable from the Camera Unit.
on the Main Board and CN400 on the Tilt Board) and
remove the Flexible Flat Cable from the Camera Unit.
8
After removed the Flexible Flat Cable from two connec-
tors, restore the lock lever of two connectors.
Otherwise the lock lever will catch on the Chassis
when the Camera Head is removed from the Chassis.
tors, restore the lock lever of two connectors.
Otherwise the lock lever will catch on the Chassis
when the Camera Head is removed from the Chassis.
Fig. 2-16
Front Lens Cover
Tilt Gear Ass'y
Remove one E Ring.
Rear
Lens
Cover
Lens
Cover
Camera Unit
Fig. 2-13
Front Lens Cover
Remove two screws.
Rear Lens Cover
Remove two screws.
Mechanical Unit
Camera Unit
Camera Unit
Fig. 2-17
CN204 on the
Main Board
Main Board
CN400 on the
Tilt Board
Tilt Board
Flexible Flat
Cable
Cable
Camera Unit
Click on the first or last page to see other WV-CS950 / WV-CS954E service manuals if exist.