Read Panasonic WV-CS950 / WV-CS954E Service Manual online
2-4
8
Referring to Fig. 2-10, remove six screws that secure the
Mounting Bracket and the Fixed Chassis, and remove the
Mounting Bracket and the Fixed Chassis from the
Camera.
Mounting Bracket and the Fixed Chassis, and remove the
Mounting Bracket and the Fixed Chassis from the
Camera.
8
Referring to Fig. 2-11, remove two screws (Left x 1, Right
x 1) that secure the Inner Domes of the Mechanical Unit.
x 1) that secure the Inner Domes of the Mechanical Unit.
Fig. 2-10
Fig. 2-11
8
Referring to Fig. 2-12, remove the Elevertion Mask (Front
x 1, Right x 1) that secure the Inner Dome (Left x 1, Right
x 1).
x 1, Right x 1) that secure the Inner Dome (Left x 1, Right
x 1).
8
Remove the Inner Dome (Left x 1, Right x 1) in the direc-
tion of the arrow from the Mechanical Unit by releasing
four hooks (Front x 2, Right x 2) of the Inner Dome.
tion of the arrow from the Mechanical Unit by releasing
four hooks (Front x 2, Right x 2) of the Inner Dome.
8
Referring to Fig. 2-13, remove one screw that secure the
FFC Holder Cover and remove the FFC Holder Cover
and the FFC Holder from the Mechanical Unit.
FFC Holder Cover and remove the FFC Holder Cover
and the FFC Holder from the Mechanical Unit.
8
Disconnect two connectors (CN4 on the Main Board and
CN1 on the Servo Board) and remove the Flexible Flat
Cable from the Mechanical Unit.
CN1 on the Servo Board) and remove the Flexible Flat
Cable from the Mechanical Unit.
8
After removed the Flexible Flat Cable from two connec-
tors, restore the lock lever of two connectors.
tors, restore the lock lever of two connectors.
8
Remove three screws that secure the Sub Chassis Ass'y.
8
Remove one screw that secure the FFC Clamp and
remove the FFC Clamp and the Sub Chassis Ass'y from
the Machanical Unit.
remove the FFC Clamp and the Sub Chassis Ass'y from
the Machanical Unit.
Fig. 2-12
Mounting Bracket
Fixed Chassis
Remove two screws.
Remove two screws.
Remove two screws.
Inner Dome
Slip Ring
Remove two screws.
(Left x 1, Right x 1)
(Left x 1, Right x 1)
Elevertion Mask
(Front x 2, Rear x 2)
(Front x 2, Rear x 2)
Inner Dome
(Left)
(Left)
Inner Dome
(Right)
(Right)
Hooks (Front x 2, Rear x 2)
Mechanical Unit
Mechanical Unit
Fig. 2-13
Sub Chassis Ass'y
FFC Holder Cover and FFC Holder
Remove one screw.
Remove one screw.
FFC Clamp
Flexible Flat Cable
Remove three screw.
Mechanical
Unit
Unit
Click on the first or last page to see other WV-CS950 / WV-CS954E service manuals if exist.