WV-CP480, WV-CP484E - Panasonic Video Monitoring Service Manual (repair manual). Page 9

2-4

8

The Fig. 4-1-1 shows the connecting diagram for the
Adjustment Procedure.

8

Connect the Underscanned Colour Video Monitor to the
VIDEO OUT Connector of the Remote E.V.R. Adjustment
Kit through the Vectorscope by using the coaxial cables.

8

Connect the Video Output Connector of the WV-
CP480/WV-CP484E to the CAMERA IN Connector of the
Remote E.V.R. Adjustment Kit by using coaxial cable.

8

Terminate the input terminal of the Underscanned Colour
Video monitor with 75 

Ω

.

8

Connect the 24 V AC or 12 V DC Power Supply Unit to
the Power Input Terminal of the WV-CP484E.

8

Connect the 12 V DC Power Supply Unit to the E.V.R.
Adjustment Kit.

8

Connect the Remote E.V.R. Adjustment Kit to the
Personel Computer (IBM PC/AT type) by using the
Standard Straight RS-232C cable.

8

Connect the probe of the Oscilloscope or Frequency
Counter at the desired Test point in each adjustment
step.

Test Chart

Floppy 
Disk

Underscanned
Colour
Video Monitor

Remote E.V.R.

Adjustment

Kit

Standard
Straight
RS-232C
Cable

RS232C

DC12V
IN

Personal 
Computer

75 

Ω

Vectorscope

(For WV-CP484E)

220 V - 240 V AC
(For WV-CP480)

CAMERA

IN

VIDEO

OUT

Video Output
Connector

AC Inlet (WV-CP480)
Power Input Terminal
(WV-CP484E)

24 V AC or 12 V DC
Power Supply Unit

12 V DC
Power Supply Unit

8

Referring to Fig. 3-3, remove two screws that secure the
CCD Ass'y (IC102) and remove the CCD Ass'y (IC102)
from the ABF Chassis Ass'y.

ABF Chassis Ass’y

CCD Ass’y
(IC102)

ABF Motor Ass’y

Remove two screws.