Read Panasonic WV-CP480 / WV-CP484E Service Manual online
2-3
8
Referring to Fig. 2-10, remove two screws that secure the
Power Board and remove the Power Board from the
Front Unit.
Power Board and remove the Power Board from the
Front Unit.
8
Reconnect the connector CN1 on the Power Board
between the Wire Ass'y of the I/F Board for adjustment.
between the Wire Ass'y of the I/F Board for adjustment.
(WV-CP480, WV-CP484E)
8
Referring to Fig. 2-11, remove two screws that secure the
Front Heat Sink and remove the Front Heat Sink from the
Front Unit.
Front Heat Sink and remove the Front Heat Sink from the
Front Unit.
8
Remove three screws that secure the Main Board and
remove the Main Board from the Front Heat Sink.
remove the Main Board from the Front Heat Sink.
8
Disconnect the connector CN600, CN601 and CN801 on
the Main Board and remove the Wire Ass'ys.
the Main Board and remove the Wire Ass'ys.
8
Disconnect the connector CN500 on the Main Board and
remove the Flexible Flat Cable.
remove the Flexible Flat Cable.
Power Board
Front Unit
Remove
two screws.
two screws.
(Adiabator Spacer)
Fig. 2-10
Remove two
screws.
screws.
Remove three
screws.
screws.
(Cushion)
Front Unit
Flexible Flat
Cable
Cable
Front Heat
Sink
Sink
Wire Ass’y
Main Board
Fig. 2-11
8
Reconnect the connectors CN600, CN601 and CN801 on
the Main Board between the Wire Ass'ys of the Front
Unit.
the Main Board between the Wire Ass'ys of the Front
Unit.
8
Reconnect the connector CN500 on the Main Board
between the Flexible Flat Cable of the Front Unit.
between the Flexible Flat Cable of the Front Unit.
8
Reconnect the connector CN1 on the I/F Board between
the Flexible Flat Cable of Main Board.
the Flexible Flat Cable of Main Board.
3. CCD Ass'y Replacement
Procedure
(Disassembling Procedure
for ABF Unit)
8
Remove the Front Unit from the Camera while referring to
the item 2. Disassemblly Procedure for Adjustment.
the item 2. Disassemblly Procedure for Adjustment.
8
Referring to Fig. 3-1, remove two screws that secure the
ABF Unit and remove the ABF Unit from the Front
Escutcheon.
ABF Unit and remove the ABF Unit from the Front
Escutcheon.
8
Referring to Fig. 3-2, remove five screws that secure the
ABF Unit and peel off Cloth Tape.
ABF Unit and peel off Cloth Tape.
8
Pull out the ABF Chassis Ass'y in the direction of the
arrow and remove the ABF Chassis Ass'y from the ABF
Frame.
arrow and remove the ABF Chassis Ass'y from the ABF
Frame.
Main Board
CN601
CN500
Wire Ass’y
Wire Ass’y
Front Unit
Wire Ass’y
Flexible
Flat Cable
Flat Cable
CN801
CN600
Fig. 3-1
Front Escutcheon
Remove two screws.
ABF Unit
Fig. 3-2
Remove
five
screws.
five
screws.
ABF Unit
Cloth Tape
ABF Chassis
Ass’y
Ass’y
ABF Frame
Click on the first or last page to see other WV-CP480 / WV-CP484E service manuals if exist.