Read Panasonic WV-CP480 / WV-CP484E Service Manual online
1-1
MAJOR OPERATING CONTROLS AND THEIR FUNCTIONS
q
AC Inlet (220 V - 240 V AC 50 Hz)
<WV-CP480 only>
<WV-CP480 only>
Is connected by the supplied power cord.
q
Power Input Terminal (DC 12 V IN, AC 24 V IN, GND)
<WV-CP484E only>
<WV-CP484E only>
Receives 24 V AC or 12 V DC from the power supply.
w
Gen-lock Input Connector
(GEN-LOCK)
(GEN-LOCK)
Receives sync source signal from an external device.
e
Video Output Connector
(VIDEO OUT)
(VIDEO OUT)
Supplies the video output to the system devices.
r
Power Indicator (POWER)
Is lit when the power is supplied.
t
Alarm Output Terminal
(ALARM OUT/GND)
(ALARM OUT/GND)
Supplies the alarm output signal to the alarm input con-
nector of an external device when the camera detects
motion. (Open collector output: 16 V DC, 100 mA max).
nector of an external device when the camera detects
motion. (Open collector output: 16 V DC, 100 mA max).
y
Day/Night Input Terminal (DAY/NIGHT IN/GND)
Is connected to an external sensor to receive day/night
detection signals.
detection signals.
u
Camera Mounting Adapter
Is used to mount the camera onto a bracket.
i
Auto Iris Lens Connector
Is connected by the auto iris lens connector (4-pin male)
supplied with the camera.
supplied with the camera.
o
Gen-lock Termination Switch
(HI-Z, G/L 75
(HI-Z, G/L 75
Ω
)
Is used to terminate the line with a 75
Ω
when the camera
is at the line end.
!0
Set Button ((SET) ABF/MENU)
Adjusts the back focus by pressing this button while dis-
playing camera pictures (ABF: Automatic Back Focus).
Refer to ABOUT SETUP MENUS for setup operations.
playing camera pictures (ABF: Automatic Back Focus).
Refer to ABOUT SETUP MENUS for setup operations.
!1
Direction Buttons ((LEFT) NEAR, (RIGHT) FAR, (UP),
(DOWN))
(DOWN))
In the back-focus adjustment, the LEFT and RIGHT but-
tons are used for manual adjustment. Refer to ABOUT
SETUP MENUS for setup operations.
tons are used for manual adjustment. Refer to ABOUT
SETUP MENUS for setup operations.
220-240V ~ 50Hz
GEN-LOCK
VIDEO OUT
POWER
ALARM
DAY/
NIGHT
NIGHT
GND
GND
IN
OUT
POWER
(UP)
(LEFT)
(RIGHT)
(DOWN)
(SET)
NEAR
G /L75
Ω
FAR
ABF/MENU
VIDEO OUT
GEN-LOCK
Hi-Z
1 - 2 - AC24V IN
1 - 2 - DC12V IN
GND
<WV-CP480>
<WV-CP484E>
q
e
w
r
t y
u
i
q
e
w
r
t y
u
o
!0 !1
(UP)
(LEFT)
(RIGHT)
(DOWN)
(SET)
FAR
ABF/MENU
Hi-Z
G /L75
Ω
NEAR
o
!0 !1
The side panel is provided for the WV-CP480
only.
Slide the panel to the left until it locks.
only.
Slide the panel to the left until it locks.
Protection screw for
transportation
transportation
Click on the first or last page to see other WV-CP480 / WV-CP484E service manuals if exist.