Read Panasonic WV-CP480 / WV-CP484E Service Manual online
2-2
8
Reconnect the connector CN2 on the I/F Board between
the Wire Ass'y of the Main Chassis for Adjustment.
the Wire Ass'y of the Main Chassis for Adjustment.
(WV-CP484E)
8
Referring to Fig. 2-7, remove two screws that secure the
Rear Escutcheon.
Rear Escutcheon.
8
Turn the Rear Escutcheon in the direction of the arrow
and remove the Rear Escutcheon from the Front Unit.
and remove the Rear Escutcheon from the Front Unit.
8
Referring to Fig. 2-8, disconnect the connector CN1 on
the Power Board and remove the Wire Ass'y.
the Power Board and remove the Wire Ass'y.
8
Referring to Fig. 2-9, remove two screws that secure the
Rear Escutcheon.
Rear Escutcheon.
8
Remove three screws that secure the I/F Board and
remove the I/F Board from the Rear Escutcheon.
remove the I/F Board from the Rear Escutcheon.
8
Disconnect the connector CN1 on the I/F Board and
remove the Flexible Flat Cable.
remove the Flexible Flat Cable.
Fig. 2-7
Remove two screws.
Rear Escutcheon
Front Unit
Wire Ass’y
CN1
Front Unit
Power Board
8
Referring to Fig. 2-4, remove the Rear Escutcheon and
remove one screw that secure the Rear Panel, the Rear
Panel while Releasing the four hooks of the Rear
Escutcheon.
remove one screw that secure the Rear Panel, the Rear
Panel while Releasing the four hooks of the Rear
Escutcheon.
8
Referring to Fig. 2-5, disconnect the connector CN1 on
the I/F Board and remove the Flexible Flat Cable.
the I/F Board and remove the Flexible Flat Cable.
8
Remove two screws that secure the Front Unit and
remove the Front Unit from the Main Chassis.
remove the Front Unit from the Main Chassis.
8
Referring to Fig. 2-6, disconnect the connector CN2 on
the I/F Board and remove the Wire Ass'y.
the I/F Board and remove the Wire Ass'y.
8
Remove three screws that secure the I/F Board and
remove the I/F Board from the Main Chassis.
remove the I/F Board from the Main Chassis.
Main Chassis
Remove one screw.
Rear Panel
Hooks
Rear
Escutcheon
Escutcheon
Fig. 2-4
Fig. 2-8
Fig. 2-5
CN1
Main Chassis
I/F Board
Flexible
Flat Cable
Flat Cable
Front Unit
Remove
two screws.
two screws.
Fig. 2-6
I/F Board
Wire Ass’y
CN2
Main Chassis
Remove three screws.
I/F Board
Flexible
Flat Cable
Flat Cable
CN1
Remove three screws.
Remove
two screws.
two screws.
Rear Escutcheon
Wire Ass’y
(Rear Panel)
Fig. 2-9
Click on the first or last page to see other WV-CP480 / WV-CP484E service manuals if exist.