WV-CP240EX - Panasonic Video Monitoring Service Manual Simplified (repair manual). Page 11

Read Panasonic WV-CP240EX Service Manual Simplified online

7.3. 3 200° K Phase Adjustment
Test Point:
CN5 (Video Output Connector)Video Board
8
Keep the Colour Temperature at 3 200ºK.
8
Aim the Camera at the Colour Chip Chart.
8
Adjust data with the ARROW keys so that the Red vector
phase becomes 108° ± 2°.
8
Repeat adjustment steps 7.1 to  7.3 until both chromi-
nance phase and gain are adjusted to proper position as
shown in Fig. 5-8 and Table 5-2.
Table 5-2
8
Press the ENTER key for next adjustment.
Red
        
±
 2˚
260 % 
±
 5 %
Phase
Gain
Yellow
        
±
 5˚
130 % 
±
 5 %
108˚
160˚
cy
g
M
G
Y
L
yl
B
b
G
C
Y
dG
10
°
0
°
10
°
100%
75%
R
V
U
mg
r
20%
20%
dG
7
Fig. 5-8
7.5. Colour Center Point Adjustment 
Test Point:
CN5 (Video Output Connector)Video Board
8
Keep the Colour Temperature at 3 200°K.
8
Aim the Camera at the Colour Chip Chart.
8
Adjust data with the ARROW keys so that data becomes
"040".
8
While observing the Vectorscope, decrease data so that
the Red gain becomes unstable as shown in Fig. 5-9 (b).
8
After that, decrease data with the DOWN key again until
the Red gain becomes stable at about 200 % as shown in
Fig. 5-9 (c).
8
Raise data with the UP key in turn until the Red gain
becomes unstable, then raise data by 1 again so that Red
gain becomes stable at about 230 % as shown in Fig. 5-9
(a).
8
Press the ENTER key for next adjustment.
M
G
Y
L
B
G
C
Y
dG
10
°
0
°
10
°
100%
75%
V
U
20%
20%
dG
M
G
Y
L
B
G
C
Y
dG
10
°
0
°
10
°
100%
75%
V
U
20%
20%
dG
M
G
Y
L
B
G
C
Y
dG
10
°
0
°
10
°
100%
75%
V
U
20%
20%
dG
(a)
(b)
(c)
Red gain
about 230 %(stable)
(Standard Value)
Red gain
about 200 %~
230 %(unstable)
Red gain
about 200 %(stable)
UP key
DOWN key
DOWN key
UP key
Fig. 5-9
Page of 14
Display

Click on the first or last page to see other WV-CP240EX service manuals if exist.