Read Panasonic WV-CP240EX Service Manual Simplified online
2
8
Referring to Fig. 3-2, remove two screws that secure the
Front Shield Plate and remove the Front Shield Plate
from the Front Unit.
Front Shield Plate and remove the Front Shield Plate
from the Front Unit.
Fig. 3-2
Front Shield
Plate
Plate
4. Connection and Setting Up for
Adjustment
4.1. Connection
8
The Fig. 4-1 shows the connecting diagram for the Adjus-
tment Procedure.
tment Procedure.
Fig. 4-1
Test Chart
Lens
Floppy Disk
Vectorscope
12 V DC (for WV-CP242EXE)
24 V AC (for WV-CP244EXE)
24 V AC (for WV-CP244EXE)
220-240 V AC (for WV-CP240EX)
Underscanned
Colour Video
Monitor
Colour Video
Monitor
12 V DC or 24 V AC
Power Supply Unit
Power Supply Unit
E.V.R.
Adjustment
Kit
Cable for
E.V.R.
Adjustment
kit
12 V DC
Power Supply Unit
Power Supply Unit
Printer
Connector
Connector
Personal
Computer
Computer
75
Ω
CAMERA
8
Referring to Fig. 3-3, remove two screws that secure the
Sensor Board and remove the Sensor Board from the
Front Unit.
Sensor Board and remove the Sensor Board from the
Front Unit.
Fig. 3-3
Sensor
Board
Board
Remove two screws
Front Unit
8
Remove the Optical Ass'y (IC1) from the Sensor Board.
Front Unit
Remove two screws
8
Connect the probe of the Digital Voltmeter, Oscilloscope
or Frequency Counter at the desired Test Point in each
adjustment step.
or Frequency Counter at the desired Test Point in each
adjustment step.
4.2. Setting Up for E.V.R. Adjustment Kit
<Connecting for E.V.R. Adjustment>
8
Referring to Fig. 4-1, connect the E. V. R. Adjustment kit
to CN2 on the Video Board of the Camera using the
Cable for E. V. R. Adjustment kit.
to CN2 on the Video Board of the Camera using the
Cable for E. V. R. Adjustment kit.
8
Connect the connector of the E. V. R. Adjustment Kit to
Personal Computer (IBM PC/AT type) using the printer
connector.
Personal Computer (IBM PC/AT type) using the printer
connector.
8
Insert original floppy disk of E. V. R. Adjustment Kit to the
computer.
computer.
3. Optical Ass'y Replacement
Procedure
8
Disassemble the Camera while referring to the item 2.
Disassembling Procedure for Adjustment.
Disassembling Procedure for Adjustment.
8
Referring to Fig. 3-1, disconnect the connector CN1 on
the Video Board and remove the Flexible Board.
the Video Board and remove the Flexible Board.
8
Referring to Fig. 3-1, remove two screws (Left x 1,Rigit
x 1) that secure the Front Unit and remove the Front Unit.
x 1) that secure the Front Unit and remove the Front Unit.
Fig. 3-1
Remove one screw
Front Unit
Remove one screw
Flexible
Board
Board
CN1
Video Board
Click on the first or last page to see other WV-CP240EX service manuals if exist.