Read Panasonic WV-CP240EX Service Manual Simplified online
cs
c
ORDER NO. AVS0602672A8
Colour CCTV Cameras
WV-CP240EX Series
SPECIFICATIONS
M a t s u s h i t a E l e c t r i c I n d u s t r i a l C o . , L t d .
A l l r i g h t s r e s e r v e d . U n a u t h o r i z e d c o p y i n g a n d
d i s t r i b u t i o n i s a v i o l a t i o n o f l a w .
d i s t r i b u t i o n i s a v i o l a t i o n o f l a w .
2 0 0 6
The Product with PbF
Pick-up Device:
752 (H) x 582 (V) pixels, Interline Transfer CCD
Scanning Area:
4.89 (H) x 3.67 (V) mm (Equivalent to scanning area of 1/3” pick-up tube)
Synchronization:
Internal, Line-locked or Multiplexed vertical drive (VD2), selectable
Scanning System:
2 : 1 interlace
Scanning:
625 lines / 50 fields / 25 frames
Horizontal:
15.625 kHz
Vertical:
50 Hz
Horizontal Resolution:
480 TV lines
Video Output:
1.0 V[p-p] PAL composite 75
Ω
/ BNC connector
Signal-to-Noise Ratio:
50 dB (Equivalent to AGC Off, weight On)
Electronic Light Control:
Equivalent to continuous variable shutter speed between 1/50 s and 1/15 000 s
Minimum Illumination:
1.5 lx {0.15 foot-candle} at F1.4
1.1 lx {0.11 foot-candle} at F1.2
1.1 lx {0.11 foot-candle} at F1.2
Detail:
SHARP or SOFT, selectable
Lens Mount:
C-mount or CS-mount, selectable
Ambient Operating Temperature:
–10°C - +50°C {14°F - 122°F}
Ambient Operating Humidity:
Less than 90 %
Simplified
Please file and use this service manual together with the following manuals.
• Service Manual WV-CP240 Series :
Order No. AVS0110390C8
• Supplement-1 WV-CP240 Series :
Order No. AVS0401546S8
(Lens: Option)
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK). NO USER
SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK). NO USER
SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
This symbol warns the user that uninsulated voltage within
the unit may have sufficient magnitude to cause electric
shock. Therefore, it is dangerous to make any kind of contact
with any inside part of this unit.
the unit may have sufficient magnitude to cause electric
shock. Therefore, it is dangerous to make any kind of contact
with any inside part of this unit.
This symbol alerts the user that important literature concerning
the operation and maintenance of this has been included.
Therefore, it should be read carefully in order to avoid
any problems.
the operation and maintenance of this has been included.
Therefore, it should be read carefully in order to avoid
any problems.
T
here are special components used in this equipment which are important for safety. These parts are indicated
by the ”
Y
” mark on the schematic diagram and the replacement parts list. It is essential that these critical
parts should be replaced with manufacturer's specified parts to prevent X-radiation, shock, fire, or other hazards.
Do not modify the original design without permission of manufacture.
IMPORTANT SAFETY NOTICE
About Lead Free Solder (PbF)
Distribution of PbF PCB:
PCBs (manufactured) using lead free solder (PbF) will have a stamp on the PCB.
Caution:
8
Lead free solder has a higher melting point than standard solder. Typically the melting points is 35
°
C – 40
°
C
(95
°
F – 104
°
F) higher. Please use a soldering iron with temperature control and adjust it to 360
°
C – 370
°
C
(680
°
F – 698
°
F). In case of using high temperature soldering iron, please be careful not to heat too long.
8
Lead free solder will tend to splash when heated too high (600
°
C / 1112
°
F).
8
Lead free solder (Sn - 3.0Ag – 0.5Cu) or equivalents are recommended on repairing our lead free soldered PCB.
Y
WARNING
This service information is designed for experienced repair technicians only and is not designed for use by the
general public.
It does not contain warnings or cautions to advise non-technical individuals of potential dangers in attempting to
service a product.
Products powered by electricity should be serviced or repaired only by experienced professional technicians. Any
attempt to service or repair the product or products dealt with in this service information by anyone else could
result in serious injury or death.
general public.
It does not contain warnings or cautions to advise non-technical individuals of potential dangers in attempting to
service a product.
Products powered by electricity should be serviced or repaired only by experienced professional technicians. Any
attempt to service or repair the product or products dealt with in this service information by anyone else could
result in serious injury or death.
STANDARD ACCESSORIES
Body Cap ...............................................................................1 pc.
Operating Instructions............................................................1 pc.
LIMITATION OF LIABILITY
THIS PUBLICATION IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING
BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR ANY PARTICULAR PURPOSE, OR
NON-INFRINGEMENT OF THE THIRD PARTY’S RIGHT.
THIS PUBLICATION COULD INCLUDE TECHNICAL INACCURACIES OR TYPOGRAPHICAL ERRORS. CHANGES ARE ADDED
TO THE INFORMATION HEREIN, AT ANY TIME, FOR THE IMPROVEMENTS OF THIS PUBLICATION AND/OR THE CORRE-
SPONDING PRODUCT (S).
BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR ANY PARTICULAR PURPOSE, OR
NON-INFRINGEMENT OF THE THIRD PARTY’S RIGHT.
THIS PUBLICATION COULD INCLUDE TECHNICAL INACCURACIES OR TYPOGRAPHICAL ERRORS. CHANGES ARE ADDED
TO THE INFORMATION HEREIN, AT ANY TIME, FOR THE IMPROVEMENTS OF THIS PUBLICATION AND/OR THE CORRE-
SPONDING PRODUCT (S).
DISCLAIMER OF WARRANTY
IN NO EVENT SHALL MATSUSHITA ELECTRIC INDUSTRIAL CO., LTD. BE LIABLE TO ANY PARTY OR ANY PERSON, EXCEPT
FOR CERTAIN WARRANTY PROGRAM OFFERED BY THE LOCAL DEALER OF PANASONIC, FOR THE CASES INCLUDING BUT
NOT LIMITED TO BELOW:
FOR CERTAIN WARRANTY PROGRAM OFFERED BY THE LOCAL DEALER OF PANASONIC, FOR THE CASES INCLUDING BUT
NOT LIMITED TO BELOW:
(1) ANY DAMAGE AND LOSS, INCLUDING WITHOUT LIMITATION, DIRECT OR INDIRECT, SPECIAL, CONSEQUENTIAL OR
EXEMPLARY, ARISING OUT OF OR RELATING TO THE PRODUCT;
(2) PERSONAL INJURY OR ANY DAMAGE CAUSED BY INAPPROPRIATE USE OR NEGLIGENT OPERATION OF THE USER;
(3) UNAUTHORIZED DISASSEMBLY, REPAIR OR MODIFICATION OF THE PRODUCT BY THE USER;
(4) INCONVENIENCE OR ANY LOSS ARISING WHEN IMAGES ARE NOT DISPLAYED, DUE TO ANY REASON OR CAUSE
INCLUDING ANY FAILURE OR PROBLEM OF THE PRODUCT;
(5) ANY PROBLEM, CONSEQUENTIAL INCONVENIENCE, OR LOSS OR DAMAGE, ARISING OUT OF THE SYSTEM COMBINED
BY THE DEVICES OF THIRD PARTY;
Power Source and
WV-CP240EX:
220 V - 240 V AC 50 Hz, 3.4 W
Power Consumption:
WV-CP242EX:
12 V DC, 270 mA
WV-CP244EX:
24 V AC 50 Hz, 3.3 W
Dimensions (without lens):
67 mm (W) x 65 mm (H) x 123 mm (D)
{2-5/8” (W) x 2-9/16” (H) x 4-13/16” (D)}
{2-5/8” (W) x 2-9/16” (H) x 4-13/16” (D)}
Weights (without lens):
WV-CP240EX:
0.495 kg {1.09 lbs}
WV-CP242EX:
0.33 kg {0.73 lbs}
WV-CP244EX:
0.35 kg {0.77 lbs}
Weights and dimensions indicated are approximate.
Specifications are subject to change without notice.
Specifications are subject to change without notice.
CONTENTS
ADJUSTMENT PROCEDURE ............................................................................................................................1
LOCATION OF TEST POINTS AND ADJUSTING CONTROLS........................................................................9
REPLACEMENT PARTS LIST .........................................................................................................................10
3
As for the rest of information, please refer to the original service manual and supplement service manual for WV-CP240,
WV-CP242E and WV-CP244E according to the table below.
Item
Service Manual
Supplement-1
MAJOR OPERATING CONTROLS AND THEIR FUNCTIONS
Refer to the page 1
———————
BLOCK DIAGRAM
SENSOR BOARD
Refer to the page 11
———————
VIDEO BOARD / POWER BOARD
Refer to the page 12
———————
SCHEMATIC DIAGRAM
SENSOR BOARD (1/2)
Refer to the page 13
———————
SENSOR BOARD (2/2)
Refer to the page 14
———————
VIDEO BOARD (1/2)
Refer to the page 17
———————
VIDEO BOARD (2/2)
Refer to the page 18
———————
POWER BOARD (WV-CP240)
Refer to the page 19
———————
POWER BOARD (WV-CP242E)
Refer to the page 20
———————
POWER BOARD (WV-CP244E)
Refer to the page 21
———————
CONDUCTOR VIEW
SENSOR BOARD
Refer to the page 15
———————
VIDEO BOARD
Refer to the page 16
———————
POWER BOARD (WV-CP240)
Refer to the page 19
———————
POWER BOARD (WV-CP242E)
Refer to the page 20
———————
POWER BOARD (WV-CP244E)
Refer to the page 21
———————
WIRING DIAGRAM
Refer to the page 22
———————
EXPLODED VIEW
WV-CP240
Refer to the page 23
———————
WV-CP242E
Refer to the page 24
———————
WV-CP244E
Refer to the page 25
———————
REPLACEMENT PARTS LIST
Refer to the page 26
Refer to the page 1,2
This service manual describes difference from the WV-CP240, WV-CP242E and WV-CP244E.