Read Panasonic WV-CP160 Service Manual online
WV-CP160
– 1 –
MAJOR OPERATING CONTROLS AND THEIR FUNCTIONS
q
Auto Iris Lens Connector
This connector is used to connect the auto iris lens. It sup-
plies power and DC control signal to the auto iris lens.
This connector is used to connect the auto iris lens. It sup-
plies power and DC control signal to the auto iris lens.
w
Flange-back Adjusting Ring
This ring is used to adjust the back focal length or picture
focus by rotating it.
This ring is used to adjust the back focal length or picture
focus by rotating it.
e
Lens (Option)
r
Camera Mounting Screw Hole
This hole is used to mount the camera onto a mounting
bracket.
This hole is used to mount the camera onto a mounting
bracket.
t
Focus Fixing Screw
y
Down Button (
)
This button is used to move the cursor downward. It is also
used to select items in the CAM SET UP menu.
used to select items in the CAM SET UP menu.
u
Right Button (
)
This button is used to move the cursor to the right. It also
selects the mode and can be used to adjust some levels.
selects the mode and can be used to adjust some levels.
i
Left Button (
)
This button is used to move the cursor to the left. It also
selects the mode and can be used to adjust some levels.
selects the mode and can be used to adjust some levels.
o
Up Button (
)
This button is used to move the cursor upward. It is also
used to select items in the CAM SET UP menu.
used to select items in the CAM SET UP menu.
!0
Set Button (
)
This button is used to activate an item selected in the CAM
SET UP menu.
SET UP menu.
!1
Selector (NC)
This selector is not used on this camera.
!2
Detail Level Selector (SOFT-SHARP)
This selector is used to select the detail / aperture level as
follows.
SOFT: When a quad system is connected to this camera,
This selector is used to select the detail / aperture level as
follows.
SOFT: When a quad system is connected to this camera,
select this position.
SHARP: Select this position usually.
!3
Microphone Selector (MIC OFF-ON)
Select ON or OFF as needed.
Select ON or OFF as needed.
!4
Microphone
!5
Power Indicator
This indicator lights up when the power of this camera is
on.
This indicator lights up when the power of this camera is
on.
!6
Monitor Output Connector (MONITOR OUT)
This connector is used to connect with the video input con-
nector of the monitor.
This connector is used to connect with the video input con-
nector of the monitor.
!7
Video Output Terminal
This terminal is used to connect with the video input con-
nector of the monitor.
This terminal is used to connect with the video input con-
nector of the monitor.
!8
Rear Cover
The rear cover can be removed to gain access to the temi-
nal.
The rear cover can be removed to gain access to the temi-
nal.
Super Dynamic
Super Dynamic
WV-
G
P160
CP160
MONITOR OUT
NC
MIC OFF-ON
SOFT-SHARP
LOCK
q t
y
!3
!0
o u
i
w
r
e
!5
!8
!4
!1
!2
!6
!7
Rear Panel
Open the panel to the upper left until it stops by rotating counterclockwise.
Click on the first or last page to see other WV-CP160 service manuals if exist.