Read Panasonic GP-MF622E / GP-MF130E Service Manual online
– 3 –
1. Test Equipment Required
The following test equipments are required for adjustment
of the Machine Vision Camera GP-MF622 and Machine
Vision B/W CCD Camera GP-MF130.
•
Oscilloscope
•
Digital Voltmeter
•
Underscanned Black and White Video Monitor
•
Signal Generator (Black Burst or Composite Video signal)
•
12V DC Power Supply Unit
•
Lighting (1,050 ± 50nt (2750 ± 150lux))
•
40-watt Lamp
•
Lux Meter
•
Manual Iris Lens (such as Fujinon HF16A)
•
Zoom Iris Lens (such as Fujinon FZ77A or equivalent)
•
ND2 Filter
•
Logarithmic Gray Scale chart
(Part Number : YWV2310RB99)
•
CAMERA CABLE (SUCH AS GP-CA34)
2. Disassembling Procedure for
Adjustment
8
Referring to Fig. 2-1, remove one screw that secure the
Volume Cover, and remove the Volume Cover.
Fig. 2-1
•
Referring to Fig. 2-2, remove one screw that secure the
Switch Cover, and remove the Switch Cover.
Fig. 2-2
ADJUSTMENT PROCEDURE
•
Referring to Fig. 2-3, remove four screws that secure the
Upper Cover, and remove the Upper Cover.
Fig. 2-3
•
Referring to Fig. 2-4, remove three screws that secure the
Front and Rear Escutcheon Units, and remove the Front
and Rear Escutcheon Units.
Fig. 2-4
•
Referring to Fig. 2-5, remove the Guide from the Main
Board.
•
Referring to Fig. 2-5, remove two screws that secure the
Main Board, and remove the Main Board in the direction
of the arrow from the chassis.
Fig. 2-5
12P
VIDEO
Remove one screw
Volume Cover
Remove one screw
Switch Cover
Remove four screws
Upper Cover
Remove three screw
Guide
Main Board
Remove two screw
Chassis
Click on the first or last page to see other GP-MF622E / GP-MF130E service manuals if exist.