Read Panasonic GP-MF622E / GP-MF130E Service Manual online
MAJOR OPERATING CONTROLS AND THEIR FUNCTIONS
– 1 –
12P
VIDEO
622
ON
OFF
1
6
1
6
7
8
9
0
A
ON
OFF
1
6
B
C
D
E
F
G
3
4
2
5
1. 1/2” Manual Iris Lens (Sold Separately)
2. Camera Connector (12-pin)
This is connected with the optional Camera Cable GP-CA34 ,
GP-CA33, GP-CA59 or GP-CA60.
GP-CA33, GP-CA59 or GP-CA60.
3. Pedestal Control
This controls the pedestal level from 0 mV to 100 mV.
4. Manual Gain Control
This controls the gain level from 0 to 6 dB.
5. Video Output Connector
This connector is used to connect with the VIDEO IN connector
of the monitor.
of the monitor.
6. Switch 1 No.1 (1/ON) 1
ON
This switch selects the Field or Frame Accumulation.
ON : Field Accumulation
OFF: Frame Accumulation
ON : Field Accumulation
OFF: Frame Accumulation
7. Switch 1 No.2 (2/ON) 2
ON
8. Switch 1 No.3 (3/ON) 3
ON
9. Switch 1 No.4 (4/ON) 4
ON
10. Switch 1 No.5 (5/ON) 5
ON
These switches (Switch 1 No. 2, 3, 4, and 5) are used to set the
shutter speed. The shutter speed changes according to the
mode which is set by the switch. (See following pages to select
mode by settings for Switch 2.)
shutter speed. The shutter speed changes according to the
mode which is set by the switch. (See following pages to select
mode by settings for Switch 2.)
1
9
2 10 8
3 11
7
12
4
5
6
Pin No.
Description
1
Ground
2
+12V IN
3
Ground for Video Out
4
Video Out
5
Ground for HD
6
HD IN
7
VD/V reset/V cont IN
8
Ground
9
No connection
10
No connection
11
No connection
12
Ground for VD
CAUTION: CONNECT THIS TO A DC 12V
CLASS 2 POWER SUPPLY
ONLY.
ONLY.
The shutter speed can be set as below:
11. Switch 1 No.6 (6/ON) 6
ON
This switch is not available for this model.
12. Switch 2 No.1 (1/ON) 1
ON
13. Switch 2 No.2 (2/ON) 2
ON
These switches (Switch 2 No.1 and 2) are used to set the
mode. You can select the mode from A, B, and C mode.
The mode can be set as below:
mode. You can select the mode from A, B, and C mode.
The mode can be set as below:
14. Switch 2 No.3 (3/ON) 3
ON
When V reset is selected (Switch 2 No.1 is ON and No.2 is
OFF), this switch selects B mode or C mode.
B mode: V reset Latch off
C mode: V reset Latch on
OFF), this switch selects B mode or C mode.
B mode: V reset Latch off
C mode: V reset Latch on
15. Switch 2 No.4 (4/ON) 4
ON
When V cont is selected (Switch 2 No.1 is OFF and No.2 is
ON), set this switch to ON and Switch 2 No.6 to OFF.
ON), set this switch to ON and Switch 2 No.6 to OFF.
16. Switch 2 No.5 (5/ON) 5
ON
This switch turns on or off the termination for HD signal with 75
Ω
.
17. Switch 2 No.6 (6/ON) 6
ON
This switch turns on or off the termination for VD signal with 75
Ω
.
When V cont is selected (Switch 2 No.1 is OFF and No.2 is
ON), set this switch to OFF and Switch 2 No.4 to ON.
ON), set this switch to OFF and Switch 2 No.4 to ON.
Switch 1
Mode
No. 2 No. 3 No. 4 No. 5
OFF OFF OFF OFF
ON
OFF OFF OFF
OFF
ON
OFF OFF
ON
ON
OFF OFF
OFF OFF
ON
OFF
ON
OFF
ON
OFF
OFF
ON
ON
OFF
ON
ON
ON
OFF
OFF OFF OFF
ON
ON
OFF OFF
ON
OFF
ON
OFF
ON
Other Combinations
A
B
C
Normal
1/2 000 1/2 000
1/120 1/2 000 1/2 000
1/500 1/2 000 1/2 000
1/1 000 1/2 000 1/2 000
1/2 000 1/2 000 1/2 000
1/4 000 1/4 000 1/4 000
1/8 000 1/8 000 1/10 000
1/16 000 1/16 000 1/30 000
1/32 000 1/32 000 Not Specified
1/64 000 1/64 000 Not Specified
1/96 000 1/96 000 Not Specified
Not Specified Not Specified Not Specified
Switch 2
Mode
No. 1
OFF
ON
OFF
Other Combinations
No. 2
OFF
OFF
ON
A mode : Internal, HD/VD
B, C mode : V reset
D mode : V cont
Not Specified
GP-MF622E
Click on the first or last page to see other GP-MF622E / GP-MF130E service manuals if exist.