ON BEAT XTREME (serv.man8) - JBL Audio EMC - CB Certificate (repair manual). Page 111

Page 9 of 11 

Report No.: 171153  

 
 

ATTACHMENT 6 

Clause 

Requirement + Test 

Result - Remark 

Verdict

 

TRF No. IEC60065J 

16 

16.1 

External flexible cords 

Replace this clause with the following: 
Flexible cord used for mains supply shall comply 
with the requirements of CSA C22.2 No 49. The 
cord type shall be in accordance with Table 4 of 
CSA C22.2 No 1. 
The attachment plug shall be rated not less than 
125% of the apparatus rated current. 
Cord sets shall comply with the requirements of 
CSA C22.2 No 21. 
Non-detachable flexible cables and cords of Class 
I apparatus shall be provided with a green/yellow 
core connected to the protective earthing terminal 
of the apparatus and, if a plug is provided, to the 
protective earthing contact of the plug. 
Compliance is checked by inspection. 
Note: The colour of cores of flexible mains cords is 
contained in IEC 60173[4]. 

Complying with CSA C22.2. 

See appended table, list of 
critical components.

 

17.9A 

17.9A.1 

Adhesive securement and conductive coatings 

Add the following clause: 
Adhesive securement 
The following parts, the displacement of which may 
result in a fire or shock hazard, shall not be 
secured solely by adhesive, unless the adhesive 
system complies with the resistance to external 
forces test of Clause 9.1.7, the bump test of 
Clause 12.1.1, and the impact test of Clause 
12.1.3, after conditioning in accordance with 
Clause 17.9A.2: 
a)  internal metal parts/conductive coatings; 
b)  barriers; and 
c)  required enclosure parts. 
Note: Cathode ray tubes are excluded from this 
test. 

 

17.9A.2 

17.9A.2.1 

General:   
Where required by Clause 17.9A.1, one sample of 
the apparatus or enclosure section shall be 
conditioned in accordance with the requirements of 
Clause 17.9A.2.2.  Equivalent ageing test data 
supplied by the manufacturer will be considered in 
lieu of ageing.