ON BEAT XTREME (serv.man8) - JBL Audio EMC - CB Certificate (repair manual). Page 114

 

Page 1 of 12

 

Report No.: 171153

 

 

 

 

 

 

 

ATTACHMENT 7 

Clause 

Requirement + Test 

Result - Remark 

Verdict 

TRF No. IEC60065J 

Test results according to Online CB BULLETIN (Last modification date of 2010-04-09) 

Differences according ................... :  IEC 60065 Ed. 7 (2005) 

Corresponding National Standard  J60065 (H20) 

No. 

Requirement – Test 

Result - Remark 

Verdict 

Add the following as a NOTE after the first 
sentence. 
NOTE 1 In Japan, the requirements for regions  
with moderate apply. 

Moderate climate covered

 

In NOTE 1, replace “see 4.2.2 of IEC 62151” by 
“see 4.2.2 of IEC 62151 [27]”. 

No TNV circuits. 

Add this sub clause. 

CLASS 0I EQUIPMENT: Equipment which has, as 
for protection against electric shock, 

-  at least using BASIC INSULATION, and 

-  providing a means of connecting to the 

protective earthing conductor in the building 
wiring those conductive parts that are otherwise 
capable of assuming HAZARDOUS 
VOLTAGES if the BASIC INSULATION fails, 
and  

-  using a supply cord without earthing conductor 

and a plug without earthing wire although the 
equipment has externally an earth terminal or a 
lead wire for earthing. 

Equipment provided with a cord set having a two-
pin type plug with a lead wire for earthing or having 
three pin - tow pin adaptor is also regarded as 
Class 0I. 

NOTE Class 0I equipment may have a part 
constructed with Double Insulation or Reinforced 
Insulation. 

Class II apparatus 

Add the “Class 0I equipment” in the first sentence 
of this sub-clause. 

Class II apparatus