Read Harman Kardon SIGNATURE 2.0 (serv.man13) User Guide / Operation Manual online
Rear Panel Connections
7
Signature 2.0
∞
Subwoofer Output
Connect to the line level mono
input of an optional powered sub-woofer, or the audio
input of an external amplifier used to drive a passive
subwoofer. If a passive subwoofer has both left and right
inputs and no indication of which to use for mono
subwoofer inputs, it is advisable that a “Y” cable be used
to feed the signal to both inputs.
input of an external amplifier used to drive a passive
subwoofer. If a passive subwoofer has both left and right
inputs and no indication of which to use for mono
subwoofer inputs, it is advisable that a “Y” cable be used
to feed the signal to both inputs.
§
RS-232 Control Port:
Permits operation by
computers or home automation systems. Requires
additional optional software and it is strongly
recommended that a Harman Kardon dealer be consulted
before any connections are made.
additional optional software and it is strongly
recommended that a Harman Kardon dealer be consulted
before any connections are made.
¶
IR Input:
If the front panel IR sensor is blocked due to
cabinet doors or other obstructions, an external IR sensor
may be used. Connect the output of the sensor to this
jack.
may be used. Connect the output of the sensor to this
jack.
•
IR Output:
May be connected to other compatible
Harman Kardon products so that they will receive infrared
commands captured by the 2.0’s remote sensor.
commands captured by the 2.0’s remote sensor.
ª
Trigger Output:
If a compatible Signature Series or
Harman Kardon audio power amplifier will be used with
the 2.0, connect the amplifier connection cable supplied
with the 2.0 between this jack and the “Trigger Input” of
the amplifier. When connected by a properly trained
dealer or installer, this output may also be used to control
other devices designed to accept a 6- to 12-volt “Power
On” trigger signal, such as projection television screens or
automatic blinds. The MAXIMUM current draw for all
circuits connected to this output is 150 milliamperes.
the 2.0, connect the amplifier connection cable supplied
with the 2.0 between this jack and the “Trigger Input” of
the amplifier. When connected by a properly trained
dealer or installer, this output may also be used to control
other devices designed to accept a 6- to 12-volt “Power
On” trigger signal, such as projection television screens or
automatic blinds. The MAXIMUM current draw for all
circuits connected to this output is 150 milliamperes.
‚
AC Power Cord:
Connect to an unswitched, wall-
mounted AC outlet.
⁄
S-Video Record Output:
Connect to the S-Video
“REC-IN” input of a VCR.
¤
S-Video Main Output:
Connect to the S-Video input
of the TV or display that will be used to view On-Screen
Menus along with any selected S-Video input.
Menus along with any selected S-Video input.
‹
S-Video Inputs:
Connect the output of S-Video
sources. Once the inputs have been connected they may
be assigned to any of the 2.0’s eight source positions using
the
be assigned to any of the 2.0’s eight source positions using
the
Source Menu
(see figure OSD-5 on page 22).
›
Composite Video Record Output:
Connect to the
composite video “REC-IN” input of a VCR.
fi
Composite Video Main Output:
Connect to the
composite video input of a TV or other video display
device that will be used to view the On-Screen Menus
along with the selected video input.
device that will be used to view the On-Screen Menus
along with the selected video input.
fl
Composite Video Inputs:
Connect the output of
composite video sources. Once the inputs have been
connected they may be assigned to any of the 2.0’s source
positions using the
connected they may be assigned to any of the 2.0’s source
positions using the
Source Menu
(see figure OSD-5
on page 22).
‡
Optical Digital Audio Inputs:
Connect the Optical
(TosLink) digital audio output of audio sources. Once the
inputs have been connected they may be assigned to any
of the 2.0’s source positions using the
inputs have been connected they may be assigned to any
of the 2.0’s source positions using the
Source Menu
(see figure OSD-5 on page 22).
°
Coax Digital Audio Inputs:
Connect the coax digital
audio output of audio sources. Once the inputs have been
connected they may be assigned to any of the 2.0’s source
positions using the
connected they may be assigned to any of the 2.0’s source
positions using the
Source Menu
(see figure OSD-5
on page 22).
·
AM Antenna Input:
Connect the AM loop antenna
supplied with the 2.0. An external AM antenna may also
be connected here.
be connected here.
a
FM Antenna Input:
Connect an FM antenna. The
supplied 300-ohm to 75-ohm adapter is required for
connections from twin-lead dipole antennas.
connections from twin-lead dipole antennas.
Click on the first or last page to see other SIGNATURE 2.0 (serv.man13) service manuals if exist.