SIGNATURE 2.0 (serv.man13) - Harman Kardon Audio User Guide / Operation Manual. Page 13

11

b)  When 

is the input source, and the tape machine

is a compatible dual cassette deck with one set of
transport functions, assignable to the transport mechas
“A” and “B” by an “A/B”button, these buttons will
switch between Tape “A” and “B”.

u

For each of the 8 sources selectable this

button may be programmed to any compatible IR code
function following the instructions on page 13. 

v

Press this button to select a station after 

you have entered its frequency or preset location using
the 

w

. When 

is selected this button

affects “Intro” Play, playing one track after another for
some seconds.

w

Press to access a radio station’s

frequency or to enter a station to a specific preset location.
See page 38 for complete information on tuning stations
and programming preset memories. When other inputs
are in use these keys may be programmed to use with TV,
CD, and VCR functions that require numeric inputs.
When shipped from the factory, the remote is
programmed with the RC-5 control codes that activate
many popular brands. It may also be re-programmed for
use with most compatible infrared control systems by
following the instructions on page 13.

x

Press to show details of current input source

On-Screen. When a digital input and Dolby Digital are in
use, the comprehensive display (see figure OSD-26 on
page 36) will also show information about the AC-3* data.
Press again to remove display from the screen.

y

Press to select a Surround mode.

Note that the selection of available modes will change
based on the use of an analog or digital input. For more
information about the Surround modes see page 51.

a)  Pressing 

will switch between the current

surround mode and mono enhancement circuits that
create an enveloping soundfield from a mono input.
When Dolby Digital is selected this button will switch
to the Dolby Digital Mono mode (Mono Downmix).

b)  Pressing 

will scroll through the surround modes

that are most appropriate to musical selections.

c)  Pressing 

will scroll through the surround

modes that are most appropriate for movie
soundtracks.

d)  Pressing 

will switch between pure two-channel

stereo sound and the previously selected surround
mode.

IMPORTANT NOTE: Using these buttons will change
the surround mode for a current listening session only.
Once the input source is changed, the 2.0 will revert to
the surround mode that has been entered using the

Source Menu

. To permanently change the surround

mode that is assigned to an input source, use the Source
Menu as described on page 22.

z

Press when the tuner is active to

scroll through the stations entered into memory.

`

When the FM tuner is active,

press this button and 

› 

i

to initiate a

search for a station with a specific program type. For more
information on RDS tuning, see page 40.

When the 2.0 is tuned to an FM station that is

transmitting RDS data, press once to display the station’s

Text

message. Press again to view the station’s call

letters, network affiliation or other identifying
information, as well as the station’s program type (PTY).
See page 40 for complete information on using the RDS
system.

When the tuner is in use, press to enter a

station into the preset memory after selecting a location
number between 1 and 30 using the 

w

.

Insert fresh AAA batteries,

being certain to observe proper polarity by matching the
(

∏

) and (

Â

) indications. To remove the cover press down

slightly on the raised ridges and gently push the cover
away from you. To replace the cover, slide it back
towards you until you hear the latch click.