SIGNATURE 2.0 (serv.man13) - Harman Kardon Audio User Guide / Operation Manual. Page 7

5

7

Press when the tuner is the input

source to select a station from the frequencies previously
entered into the preset memories.

8

Press to temporarily silence the audio output.

Press again, or change volume level to return to normal
operation. When Mute is activated, the feed to any
recorders connected to the 

£

will

remain uninterrupted. When Mute is engaged a message
will appear in the on-screen display (see figure OSD-15 on
page 30) and the word 

Mute

will replace the volume

level in the 

)

(see figure FPD-9 on

page 30).

9

Turn to the right or left to raise or lower

volume. This electronic volume control does not have a
start or end point to its rotation. Volume indications are
provided in both the front panel 

)

and on-screen (see figure OSD-13 on page 30).

)

This two-line display displays

the current input source and surround mode at the left
side, and volume level on the right side. When the tuner is
in use the top line will show the preset number and
frequency of the station being listened to. Additional
messages will be displayed depending on which input or
mode is in use, including RDS data from the FM tuner,
and abbreviated versions of the on-screen menus used
during installation, setup and configuration.

!

This sensor receives

commands from the infrared remote control. Make certain
that it is not blocked by cabinets, smoked glass or doors
or other objects that may interfere with the line of sight
from the remote.