SIGNATURE 2.0 (serv.man13) - Harman Kardon Audio User Guide / Operation Manual. Page 8

6

¡

Use for connections to optional,

external audio adapters for formats such as MPEG that are
not decoded by the 2.0. To select a device connected to
these jacks, the audio input for a source must be changed
to “6-CH Direct” using the 

Source Menu

(see figure

OSD-6 on page 24).

™

Connect the output of analog

audio devices to these inputs. Note the left channel input
is on top, and the right channel input is on the bottom.
Once the inputs have been connected they may be
assigned to any of the 2.0’s eight source positions using
the 

Source Menu

(see figure OSD-6 on page 24).

£

Two pairs of jacks carry the

identical audio signal, which is the audio output selected
through the 

Record Output

menu (see figures 

OSD-38 and OSD-39 on page 45). Connect to the “REC
IN” input of a VCR, cassette recorder, DAT, reel-to-reel
recorder, or another audio recording device.

¢

Connect to the input

of the audio power amplifier. Make certain that channels
are connected to a matching input on the amp. (e.g., front
left to front left, center to center, etc.).

IMPORTANT NOTE: Never make or remove any connections to the Signature 2.0 with the Master Power Switch “ON”.
Make certain that power amplifiers connected to the 2.0 are turned off when making or removing any connections. This
eliminates the risk of possible damage to speakers or other system components.

When making connections to the Signature 2.0 make certain that the plugs are firmly seated into the jacks. This prevents
intermittent connections which may interfere with performance.

 

SUB

1

2

3

4

5

6

SURR

CENTER

SURR

CENTER

FRONT

1

2

3

4

6

5

3

2

RS-232

230V

 

~

 50Hz

75 WATTS

IR
IN

IR

OUT

TRIGGER

OUTPUT

FM

AM

FRONT

1

1

Manufactured under license from Dolby Laboratories Licensing 
Corporation. "Dolby", "AC-3", "Pro Logic" and the Double-D symbol
are trademarks of Dolby Laboratories Licensing Corporation. 
Copyright 1992 Dolby Laboratories, Inc. All rights reserved.

SERIAL NUMBER

MODEL NO.: SIGNATURE SERIES 2.0
HARMAN KARDON
NORTHRIDGE
CALIFORNIA, USA
MADE IN USA 

  

RISQUE DE CHOC ELECTRIQUE - NE PAS OUVRIR

TO REDUCE THE RISK OF FIRE 

OR ELECTRIC SHOCK DO NOT EXPOSE THIS 
EQUIPMENT TO RAIN OR MOISTURE.  

4

5

6

2

SUB

NRTL / C

LR110480

CSA E65

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.

Double Insulated – When servicing
use only identical replacement parts.

¡

™

£

¢ ∞

¶ • ª

§

‚

⁄

‹

¤

fi›

°

‡

fl

·

a

SUB

¡
™
£
¢
∞
§
¶

6-CH Direct Inputs

Analog Audio Inputs

Record Outputs

Main Channel Audio Outputs

Subwoofer Output

RS-232 Control Port

IR Input

•
ª
‚
⁄
¤
‹
›

IR Output

Trigger Output

AC Power Cord

S-Video Record Output

S-Video Main Output

S-Video Inputs

Composite Video Record Output

fi
fl
‡
°
·
a

Composite Video Main Output

Composite Video Inputs

Optical Digital Audio Inputs

Coax Digital Audio Inputs

AM Antenna Input

FM Antenna Input