SIGNATURE 2.0 (serv.man13) - Harman Kardon Audio User Guide / Operation Manual. Page 6

4

1

To turn the unit on, press this switch

in until it latches and is flush with the front panel. To turn
the unit off press in briefly, and the switch will pop out.
Once this switch is “ON” you may use the remote control
or standby switch to turn the 2.0 on or off.

NOTE: Even when the 

is “OFF”,

the 2.0 is still connected to AC power.

2

Press to turn the unit on from Standby. Press

again to return to Standby. In order for this switch to
operate, 

1

must be “ON”, as indicated by

the amber 

5

.

3

Press to change input source. Use them to

scroll through the list of sources.

4

Press to change surround mode. The list of

modes available is different for digital or analog audio
sources.

5

When this indicator lights in an amber

color, the 2.0 is in Standby, ready to be turned on or off
when 

2

, or the remote 

a

is

pressed. When the 

is out, but the 

6

is illuminated in blue, the unit is on. When

both indicators are dark, the 2.0 is fully off, indicating that

1

is “OFF” or the 2.0 is not plugged into a

live AC power source.

6

This indicator is illuminated 

in blue when the 2.0 is in full operation. If it is not lit, and
the 

5

is amber, the unit is in Standby.

When neither indicator is lit, the 2.0 is off, or the unit is
not connected to a live AC power source.

Mute

Tune

Surround

Source

  2.0 

Standby

On/Off

DVD              Vol

Dolby Digital     10

1

2

3

4

7

9

!

)

8

5 6

1

2

3

4

Master Power Switch

Standby Switch

Source Selectors

Surround Selectors

5

6

7

8

Standby LED

Power Indicator

Tune Buttons

Mute Button

9

)

!

Volume Control

Information Display

Remote Sensor Window