Read Harman Kardon SB 30 (serv.man3) EMC - CB Certificate online
Page 12 of 52
Report No. : 12-1330-0135
IEC/EN 60065
Clause
Requirement
– Test
Result - Remark
Verdict
Temperature rise of printed circuit boards (PCB)
exceeding the limits of table 3 by max. 100 K for
max. 5 min
exceeding the limits of table 3 by max. 100 K for
max. 5 min
N/A
a) Temperature rise of printed circuit boards (PCB)
to 20.1.3, exceeding the limits of table 3 by not
more than 100 K for an area not greater than 2 cm²
to 20.1.3, exceeding the limits of table 3 by not
more than 100 K for an area not greater than 2 cm²
N/A
b) Temperature rise of printed circuit boards (PCB)
to 20.1.3 up to 300 K for an area not greater than
2 cm² for a maximum of 5 min
to 20.1.3 up to 300 K for an area not greater than
2 cm² for a maximum of 5 min
N/A
Meets all the special conditions if conductors on
printed circuit boards are interrupted
printed circuit boards are interrupted
N/A
Class I protective earthing maintained
Class II apparatus.
N/A
11.2.4
Temperature rise of parts acting as a support or
mechanical barrier
mechanical barrier
(see appended table 11.2)
Pass
11.2.5
Temperature rise of windings
(see appended table 11.2)
Pass
11.2.6
Temperature rise of parts not subject to the limits
of 11.2.1 to 11.2.5 Table 3 e) "Other Parts"
of 11.2.1 to 11.2.5 Table 3 e) "Other Parts"
(see appended table 11.2)
Pass
12
MECHANICAL STRENGTH
12.1.1
Bump test where mass >7 kg
Approx.8.7 kg, The apparatus is
still complying with relevant
requirements of this standard for
models SB 30 SUB and SB 30
SUB/230.
still complying with relevant
requirements of this standard for
models SB 30 SUB and SB 30
SUB/230.
Pass
12.1.2
Vibration test (portable, metal, musical amps)
The apparatus is still complying
with relevant requirements of this
standard.
with relevant requirements of this
standard.
Pass
12.1.3
Impact hammer test
No damage to the apparatus
after the impact test.
after the impact test.
Pass
Steel ball test (for non-ventilated solid areas)
Pass
12.1.4
Drop test for portable apparatus where mass = 7
kg
kg
Complied with SB 30 CNTR.
Pass
12.1.5
Thermoplastic enclosures stress relief test
91
o
C
Pass
12.2
Fixing of knobs, push buttons, keys and levers
No hazards.
Pass
12.3
Remote controls with hazardous live parts
No remote control used.
N/A
12.4
Drawers (pull test 50 N, 10 s)
No drawer is provided.
N/A
12.5
Antenna coaxial sockets providing isolation
No antenna coaxial socket is
provided.
provided.
N/A
12.6
Telescoping or rod antennas construction
No such device.
N/A
12.6.1
Telescoping or rod antennas securement
No such device.
N/A
Click on the first or last page to see other SB 30 (serv.man3) service manuals if exist.