Read Harman Kardon GO PLAY MICRO (serv.man2) EMC - CB Certificate online
Page 13 of 58
Report No. 15039146 001
IEC 60950-1
Clause
Requirement + Test
Result - Remark
Verdict
TRF No. IEC60950_1B
2.6.5.6
Corrosion resistance
N/A
2.6.5.7
Screws for protective bonding
N/A
2.6.5.8
Reliance on telecommunication network or cable
distribution system
distribution system
N/A
2.7
Overcurrent and earth fault protection in primary circuits
N/A
2.7.1
Basic requirements
N/A
Instructions when protection relies on building
installation
installation
N/A
2.7.2
Faults not simulated in 5.3.7
N/A
2.7.3
Short-circuit backup protection
N/A
2.7.4
Number and location of protective devices ........... :
N/A
2.7.5
Protection by several devices
N/A
2.7.6
Warning to service personnel ................................ :
N/A
2.8
Safety interlocks
N/A
2.8.1
General principles
N/A
2.8.2
Protection requirements
N/A
2.8.3
Inadvertent reactivation
N/A
2.8.4
Fail-safe operation
N/A
Protection against extreme hazard
N/A
2.8.5
Moving parts
N/A
2.8.6
Overriding
N/A
2.8.7
Switches, relays and their related circuits
N/A
2.8.7.1
Separation distances for contact gaps and their
related circuits (mm) ..............................................:
related circuits (mm) ..............................................:
N/A
2.8.7.2
Overload test
N/A
2.8.7.3
Endurance test
N/A
2.8.7.4
Electric strength test
(see appended table 5.2)
N/A
2.8.8
Mechanical actuators
N/A
2.9
Electrical insulation
The unit is supplied from an approved power supply that provides SELV. Only SELV
and limited current circuit inside the unit.
The unit is supplied from an approved power supply that provides SELV. Only SELV
and limited current circuit inside the unit.
P
2.9.1
Properties of insulating materials
P
2.9.2
Humidity conditioning
Natural rubber, asbestos or
hygroscopic materials are not
used.
hygroscopic materials are not
used.
P
Relative humidity (%), temperature (°C) .......... ..... :
Click on the first or last page to see other GO PLAY MICRO (serv.man2) service manuals if exist.