Read Harman Kardon GO PLAY MICRO (serv.man2) EMC - CB Certificate online
Page 16 of 58
Report No. 15039146 001
IEC 60950-1
Clause
Requirement + Test
Result - Remark
Verdict
TRF No. IEC60950_1B
- Basic insulation not under stress .........................:
N/A
- Supplemetary, reinforced insulation ....................:
N/A
2.10.6
Construction of printed boards
N/A
2.10.6.1
Uncoated printed boards
(see appended table 2.10.3
and 2.10.4)
and 2.10.4)
N/A
2.10.6.2
Coated printed boards
(see appended table 2.10.3
and 2.10.4)
and 2.10.4)
N/A
2.10.6.3
Insulation between conductors on the same inner
surface of a printed board
surface of a printed board
(see appended table 2.10.3
and 2.10.4)
and 2.10.4)
N/A
2.10.6.4
Insulation between conductors on different layers of
a printed board
a printed board
N/A
Distance through insulation
(see appended table 2.10.5)
N/A
Number of insulation layers (pcs) ...........................:
N/A
2.10.7
Component external terminations
(see appended table 2.10.3
and 2.10.4)
and 2.10.4)
N/A
2.10.8
Tests on coated printed boards and coated
components
components
N/A
2.10.8.1
Sample preparation and preliminary inspection
N/A
2.10.8.2
Thermal conditioning
N/A
2.10.8.3
Electric strength test
(see appended table 5.2)
N/A
2.10.8.4
Abrasion resistance test
N/A
2.10.9
Thermal cycling
N/A
2.10.10
Test for Pollution Degree 1 environment and
insulating compound
insulating compound
N/A
2.10.11
Tests for semiconductor devices and cemented
joints
joints
N/A
2.10.12
Enclosed and sealed parts
N/A
3
WIRING, CONNECTIONS AND SUPPLY
P
3.1
General
See below.
P
3.1.1
Current rating and overcurrent protection
The cross-sectional area of the
wires is adequate and
complied with the tests of 4.5.2
and 4.5.3.
wires is adequate and
complied with the tests of 4.5.2
and 4.5.3.
P
3.1.2
Protection against mechanical damage
The wireways (including
holes) are smooth and free
from sharp edges.
holes) are smooth and free
from sharp edges.
P
3.1.3
Securing of internal wiring
No excessive strain on wire
and on terminal connections,
loosing of terminal
connections and damage of
conductor insulation.
and on terminal connections,
loosing of terminal
connections and damage of
conductor insulation.
P
Click on the first or last page to see other GO PLAY MICRO (serv.man2) service manuals if exist.