Read Harman Kardon AVR 360 EMC - CB Certificate online
- Page 17 of 44 -
Report
No.
129950
IEC 60065
Clause
Requirement – Test
Result - Remark
Verdict
TRF No. IEC60065_I
14.3.4.2
Class I transformers, with basic insulation and
protective screening only if all 7 conditions of
14.3.4.2 are met ……………………………….:
protective screening only if all 7 conditions of
14.3.4.2 are met ……………………………….:
Class II apparatus.
No such transformer used.
No such transformer used.
N/A
14.3.4.3
Separating transformers with at least basic
insulation:
insulation:
Windings of Class II
construction used.
construction used.
N/A
14.3.5
Insulation between HAZARDOUS LIVE parts and
ACCESSIBLE parts
ACCESSIBLE parts
P
14.3.5.1
Class II transformers have adequate insulation
between hazardous live parts and accessible parts
(double or reinforced insulation) ……………...:
between hazardous live parts and accessible parts
(double or reinforced insulation) ……………...:
Double or reinforced insulation
between hazardous live
windings and accessible
conductive parts.
between hazardous live
windings and accessible
conductive parts.
P
Coil formers and partition walls > 0,4 mm …...:
Main and Sub transf. bobbin
fulfils the requirement of
reinforced insulation; bobbin
thickness > 0,4 mm.
fulfils the requirement of
reinforced insulation; bobbin
thickness > 0,4 mm.
P
14.3.5.2
Class I transformers have adequate insulation
between hazardous live parts and accessible
conductive parts or those conductive parts or
protective screens connected to a protective earth
terminal ………………:
between hazardous live parts and accessible
conductive parts or those conductive parts or
protective screens connected to a protective earth
terminal ………………:
Winding of Class II
construction used.
construction used.
N/A
Winding wires connected to protective earth have
adequate current-carrying capacity ……..:
adequate current-carrying capacity ……..:
N/A
14.4
High voltage components ……………………..:
No high-voltage components.
N/A
High-voltage components and assemblies: U > 4 kV
(peak) separately approved .....................:
(peak) separately approved .....................:
N/A
Component meets category V-1 of IEC 60707:
N/A
14.4.1
High voltage transformers and multipliers tested as
part of the submission ……………………:
part of the submission ……………………:
N/A
14.4.2
High voltage assemblies and other parts tested as
part of the submission ………………………:
part of the submission ………………………:
N/A
14.5 Protective
devices
P
Protective devices used within their ratings ………:
Thermal link and fuses
P
External clearances and creepage distances meet
requirement of clause 13 for the voltage across the
device when opened ………………………......:
requirement of clause 13 for the voltage across the
device when opened ………………………......:
Certified protective devices
applied. See appended table,
list of critical components.
applied. See appended table,
list of critical components.
P
14.5.1.1
a) Thermal cut-outs separately approved …………:
N/A
b) Thermal cut-outs tested as part of the submission:
N/A
Click on the first or last page to see other AVR 360 service manuals if exist.