KV-SZ292M31 (serv.man2) - Sony TV Service Manual (repair manual). Page 14

– 13 –

Dress Cap Assy, High Voltage with Holder, HV Cable 
combi as shown.

CAUTION: 1) Make sure the specified position is 
 being 

followed.

                  2)  Position the Cap Assy, High Voltage in 
 

the inner ring of the Holder, HV cable  

 combi 

(see 

diagram).

TVSR requirement:
1. Spacing between HV cable and other conductive
part's surface is 1mm/kV or more.
2. Spacing between HV cable's and enclosure with
ventilation or the edge where terminal bracket and  
rear cover meet: 10mm or more.

CAUTION:
Production side please ensure that the portion of HV 
cable above the Holder, HV Cable Combi is kept away
from CRT's carbon area.

Also, portion of HV cable below the Holder, HV Cable  
Combi needs to be kept away from conductive parts 
(DGC, rotation coil, CRT's carbon area, speaker wire, etc.)

Ensure forming of HV cable is OK and no unnatural curve 
occurs. Do not twist or loop the cable.

Install AC cord holder to AC power cord at specified position as shown.

290 ± 5mm 

630 ± 5mm 

DGC

HV cap

Hook AC cord into

CRT support's hook

Make sure AC cord is

straight between 

boss and holder

Attach AC cord onto

holder and insert to

bottom cover

Attach Purse Lock (S)

Ø 8 in to rear cover

DGC

Holder, HV cable combi

230 ± 5 mm

Inner Ring

Min. distance = 1mm/kV

Min. distance = 1mm/kV

Min. distance = 

1mm/kV

Keep distance of HV cable

from other wires, conductive

parts and CRT's carbon area

CRT's carbon

area

CRT's carbon

area

Dress Holder, HV Cable Combi to

Cap Assy, High Voltage

Dress behind boss

AC Cord Holder