Read Sony KV-SZ292M31 (serv.man2) Service Manual online
– 8 –
KV-SZ292M31/M50
RM-GA002
2-4. Dressing of Conn Assy, 5P YUV
Dress Conn Assy, 5P YUV around shield case.
Use pin wires A019 and A017 to dress Conn Assy, 5P
YUV as shown.
Use pin wires A019 and A017 to dress Conn Assy, 5P
YUV as shown.
2-5. Dressing of Conn Assy, 4P VM and
Connector Assy, 5P Front In
Dress Conn Assy, 4P VM behind Conn Assy, 5P Front
In as shown.
In as shown.
CAUTION:
Keep Conn Assy, 5P Front In away from deflection area
(T504, R5032, etc.) when dressing.
Keep Conn Assy, 5P Front In away from deflection area
(T504, R5032, etc.) when dressing.
CN007
CN9201
Make sure the UL tape is positioned at
the sharp edge of shield case to prevent
wire from being scratched
Dress Conn Assy, 5P YUV
around shield case
Keep wires away
from R121
CN905
Pin, wire A019
Dress Conn Assy, 4P VM behind
Conn Assy, 5P Front In
Lead Assy, Earth is
above Conn Assy, 5P
Conn Assy, 5P
Front In
Deflection area
T504
R5032
CN003
CN9201
R579
Conn Assy, 4P VM
Pin, wire A017
Conn Assy, 5P YUV
2-3.
Wire Dressing at A and H2 board
TVSR:
Connector assy must be kept away
from primary area(10mm minimum).
Connector assy must be kept away
from primary area(10mm minimum).
i) Insert and dress Conn Assy, 4P into hook.
ii) Insert Conn Assy, 5P into CN4105. Make sure
AC Power Cord is behind Lead Assy, Speaker at
CN4106.
AC Power Cord is behind Lead Assy, Speaker at
CN4106.
2
1
CN4113
CN3102
CN2105
CN4110
Conn Assy, 4P
CN4106
CN4105
Lead Assy, Speaker
Conn Assy, 5P
AC Power Cord is behind
Lear Assy, Speaker
Conn Assy, 7P
Insert Conn Assy,
4P into hook
Click on the first or last page to see other KV-SZ292M31 (serv.man2) service manuals if exist.