KV-SK29M80 - Sony TV Service Manual (repair manual). Page 14

– 13 –

ii)

DGC

630 ± 5mm 

 

 

 

i) Dress Cap Assy, High Voltage with Holder, HV cable combi as shown.

Caution: 1) Make sure the specified position is being followed.
 

2) Position the Cap Assy, High Voltage in the inner ring of the

 

  Holder, HV cable combi (see diagram).

Install AC cord holder to AC power cord at specified position as shown.

HV cap

CRT's carbon

area

Dress Holder, HV Cable Combi

to Cap Assy, High Voltage

TVSR requirement:
1. Spacing between HV cable and other conductive part’s
  surface is 1mm/kV or more.
2. Spacing between HV cable's and enclosure with ventilation or
  the edge where terminal bracker and rear cover meet:10mm or more.

Caution:
-  Please ensure that the portion of HV cable above the holder, HV 
  cable combi is kept away from CRT'S carbon area
-  Also, portion of HV cable below the holder, HV cable combi needs
  to be kept away from conductive parts (DGC, rotation coil, CRT'S
  carbon area, speaker wire etc)
-  Ensure for ming of HV cable is ok and no unnatlural curve occurs.

CRT's carbon

area

Min. distance = 1mm/kV

Min. distance = 1mm/kV

Holder, HV cable combi

230 ± 5 mm

DGC

Inner Ring

Make sure AC cord is

straight between boss and holder

Attach AC cord onto

holder and insert to bottom cover

Attach Purse Lock (S)

Ø 8 in to rear cover

Dress behind boss

Hook AC cord into

CRT support's hook